Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Segment Routing

  • Support for flexible algorithm in OSPFv2 for segment routing traffic engineering (ACX5448, ACX710, MX204, MX104, MX480, MX960, MX10003, MX2020, and PTX10001)—Starting in Junos OS Release 21.1R1, you can thin-slice a network by defining flexible algorithms that compute paths using different parameters and link constraints based on your requirements. For example, you can define a flexible algorithm that computes a path to minimize IGP metric and define another flexible algorithm to compute a path based on traffic engineering metric to divide the network into separate planes. This feature allows networks without a controller to configure traffic engineering and utilize segment routing capability of a device.

    To define a flexible algorithm, include the flex-algorithm statement at the [edit routing-options] hierarchy level.

    To configure a device to participate in a flexible algorithm, include the flex-algorithm statement at the [edit protocols ospf source-packet-routing] hierarchy level.

    [See How to Configure Flexible Algorithms in OSPF for Segment Routing Traffic Engineering.]

  • Support for strict SPF and IGP shortcut (ACX710, MX960, MX10008, MX2020, PTX5000, and PTX1000)—Starting in Junos OS Release 21.1R1, you can configure segment routing algorithm 1 (strict SPF) and advertise its SIDs in IS-IS link-state PDU (LSPDU) and use these SIDs to create SR-TE tunnels to forward the traffic by using the shortest IGP path to reach the tunnel endpoint while avoiding loops. You can also specify a set of prefixes in the import policy, based on which the tunnel can redirect the traffic to a certain destination. You can use algorithm 1 (strict SPF) along with algorithm 0 (default SPF) by default when Source Packet Routing in Networking (SPRING) is enabled.

    [See How to Enable Strict SPF SIDs and IGP Shortcut, prefix-segment, and source-packet-routing.]