Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Importing a QFX3000-M QFabric System Control Plane EX Series Switch Configuration with a USB Flash Drive

There are two methods of importing the configuration file to the QFX3000-M QFabric system control plane EX Series switches.

Note:

The EX Series switch configuration is the same for both the copper-based and fiber-based QFX3000-M QFabric system control plane networks.

Before you begin:

To import the control plane EX Series switch configuration file onto a USB flash drive:

  1. In a browser, go to https://www.juniper.net/support/downloads/junos.html .

    The Junos Platforms - Download Software page appears.

    Note:

    To access the download site, you must have a service contract with Juniper Networks and an access account. If you need help obtaining an account, complete the registration form at the Juniper Networks website

    https://www.juniper.net/registration/Register.jsp .

  2. In the QFX Series box, select QFX3000-M QFabric System.

    The QFX3000-M QFabric System - Download Software page appears.

  3. Click the Software tab and select the software release number from the Release list that appears to the right of the Software tab.

    A login screen appears.

  4. In the QFabric System Control Plane Network section, select QFX3000-M Control Plane Network Configuration.

    A login screen appears.

  5. Enter your user ID and password and click Login.
  6. Read the End User License Agreement, select the I agree option button, and then click Proceed.
  7. Save the configuration file onto the USB flash drive using your computer or other device.
  8. Insert the USB flash drive into the USB port on the EX Series switch.
  9. Save the file to the /var/home/username directory on the EX Series switch.
  10. Load the configuration file into the switch.
  11. Commit the configuration.
  12. Remove the USB flash drive from the switch.