Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Connecting a QFX3600 Node Device to a Copper-Based QFX3000-M QFabric System Control Plane Network

Before you begin to connect a QFX3600 Node device to the copper-based QFX3000-M QFabric system control plane network:

  • Install your QFabric system hardware (Director group, Interconnect devices, and Node devices). For more information, see Installing and Connecting a QFX3100 Director Device, Installing and Connecting a QFX3600 or QFX3600-I Device, and Installing and Connecting a QFX3500 Device.

  • Install your EX4200 or EX4300 switches. See Installing and Connecting an EX4200 Switch or Installing and Connecting an EX4300 Switch.

  • Interconnect the two EX Series switches. See Interconnecting Two EX Series Switches for QFX3000-M QFabric System Control Plane Redundancy.

    Note:

    Use either an EX4200-24T switch with an SFP+ uplink module installed or use an EX4300-48T switch with an SFP+ uplink module installed.

  • Ensure that you have two RJ-45 patch cables available for each Node device. For cable specifications, see Cable Specifications for Copper-Based Control Plane Connections for the QFabric System.

  • Use Table 1 to determine the QFX3600 Node device-to-EX Series switch port mappings. Specific ports have been reserved on the EX Series switch to connect to each of the QFX Series device types. Such design simplifies installation and facilitates timely deployment of a QFabric system.

    Note:

    The numerical identifiers for each Node device below are not preassigned to the Node devices that are shipped to you. They represent the order in which you connect the Node devices. For example, the first Node device (Node0) is connected to port 0 (ge-0/0/0) on the first EX Series switch EX0 and port 0 (ge-0/0/0) on the second EX Series switch EX1.

    Table 1: QFX3600 Node Device-to-EX Series Switch Port Mappings for Copper-Based Control Plane

    Node Device

    EX Series Switch EX0

    EX Series Switch EX1

    Node 0

    Node0, management port C0 to port 0

    (ge-0/0/0)

    Node0, management port C1 to port 0

    (ge-0/0/0)

    Node 1

    Node1, management port C0 to port 1

    (ge-0/0/1)

    Node1, management port C1 to port 1

    (ge-0/0/1)

    Node 2

    Node2, management port C0 to port 2

    (ge-0/0/2)

    Node2, management port C1 to port 2

    (ge-0/0/2)

    Node 3

    Node3, management port C0 to port 3

    (ge-0/0/3)

    Node3, management port C1 to port 3

    (ge-0/0/3)

    Node 4

    Node4, management port C0 to port 4

    (ge-0/0/4)

    Node4, management port C1 to port 4

    (ge-0/0/4)

    Node 5

    Node5, management port C0 to port 5

    (ge-0/0/5)

    Node5, management port C1 to port 5

    (ge-0/0/5)

    Node 6

    Node6, management port C0 to port 6

    (ge-0/0/6)

    Node6, management port C1 to port 6

    (ge-0/0/6)

    Node 7

    Node7, management port C0 to port 7

    (ge-0/0/7)

    Node7, management port C1 to port 7

    (ge-0/0/7)

    Node 8

    Node8, management port C0 to port 8

    (ge-0/0/8)

    Node8, management port C1 to port 8

    (ge-0/0/8)

    Node 9

    Node9, management port C0 to port 9

    (ge-0/0/9)

    Node9, management port C1 to port 9

    (ge-0/0/9)

    Node 10

    Node10, management port C0 to port 10

    (ge-0/0/10)

    Node10, management port C1 to port 10

    (ge-0/0/10)

    Node 11

    Node11, management port C0 to port 11

    (ge-0/0/11)

    Node11, management port C1 to port 11

    (ge-0/0/11)

    Node 12

    Node12, management port C0 to port 12

    (ge-0/0/12)

    Node12, management port C1 to port 12

    (ge-0/0/12)

    Node 13

    Node13, management port C0 to port 13

    (ge-0/0/13)

    Node13, management port C1 to port 13

    (ge-0/0/13)

    Node 14

    Node14, management port C0 to port 14

    (ge-0/0/14)

    Node14, management port C1 to port 14

    (ge-0/0/14)

    Node 15

    Node15, management port C0 to port 15

    (ge-0/0/15)

    Node15, management port C1 to port 15

    (ge-0/0/15)

A QFX3000-M QFabric system control plane and management network is formed by connecting the QFX Series devices in your network to two EX4200 or two EX4300 switches. QFX3600 Node devices have two 1000BASE-T management ports (labeled C0 and C1) with RJ-45 connectors. For a copper-based control plane network, use the 1000BASE-T management ports to connect the QFX3600 Node device to each EX Series switch (see Figure 1).

Note:

You may not mix EX4200 and EX4300 switches in the same QFabric system.

Figure 1: QFX3600 Node Device Copper-Based Control Plane Connections for QFX3000-M QFabric SystemQFX3600 Node Device Copper-Based Control Plane Connections for QFX3000-M QFabric System
CAUTION:

For redundancy, each QFX3600 Node device must be connected to two EX Series switches.

To connect a QFX3600 Node device to the copper-based QFX3000-M QFabric system control plane network (see Figure 1):

  1. Connect one end of the first RJ-45 patch cable to the first 1000BASE-T management port (labeled C0) on the Node device front panel.
  2. Connect the other end of that cable to the appropriate port on the EX Series switch. See Table 1.
  3. Connect one end of the second RJ-45 patch cable to the second 1000BASE-T management port (labeled C1) on the Node device front panel.
  4. Connect the other end of that cable to the appropriate port on the second EX Series switch. This should be the same port number that you connected to in Step 2. For example, if you connected the first cable to ge-0/0/0 on the first EX Series switch, you connect the second cable to ge-0/0/0 on the second EX Series switch.
  5. Repeat this procedure for each QFX3600 Node device.