Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

request chassis cluster failover redundancy-group

Syntax

Description

For chassis cluster configurations, initiate manual failover in a redundancy group from one node to the other, which becomes the primary node, and automatically reset the priority of the group to 255. The failover stays in effect until the new primary node becomes unavailable, the threshold of the redundancy group reaches 0, or you use the request chassis cluster failover reset command.

After a manual failover, you must use the request chassis cluster failover reset command before initiating another failover.

Options

  • node node-number—Number of the chassis cluster node to which the redundancy group fails over.

  • Range: 0 or 1

  • redundancy-group group-number—Number of the redundancy group on which to initiate manual failover. Redundancy group 0 is a special group consisting of the two Routing Engines in the chassis cluster.

    Range: 0 through 255

Required Privilege Level

maintenance

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

request chassis cluster failover redundancy-group

Release Information

Command introduced in Junos OS Release 9.0.