show snmp health-monitor
Syntax
show snmp health-monitor <alarms <detail>> | <logs>
Description
Display information about Simple Network Management Protocol (SNMP) health monitor alarms and logs.
Options
| none | Display information about all health monitor alarms and logs. |
| alarms <detail> | (Optional) Display detailed information about health monitor alarms. |
| logs | (Optional) Display information about health monitor logs. |
Required Privilege Level
view
Output Fields
Table 1 describes the output fields for the show snmp health-monitor command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
Level of Output |
|---|---|---|
Alarm Index |
Alarm identifier. |
All levels |
Variable description |
Description of the health monitor object instance being monitored. |
All levels |
Variable name |
Name of the health monitor object instance being monitored. |
All levels |
Value |
Current value of the monitored variable in the most recent sample interval. |
All levels |
State |
State of the alarm or event entry:
|
All levels |
Variable OID |
Object ID to which the variable name is resolved. The format is x.x.x.x. |
detail |
Sample type |
Method of sampling the monitored variable and calculating the value to compare against the upper and lower thresholds. It can have the value of absolute value or delta value. |
detail |
Startup alarm |
Alarm that might be sent when this entry is first activated, depending on the following criteria:
|
detail |
Owner |
Name of the entry configured by the user. If the entry was created through the CLI, the owner has monitor prepended to it. |
detail |
Creator |
Mechanism by which the entry was configured (Health Monitor). |
detail |
Sample interval |
Time period between samples (in seconds). |
detail |
Rising threshold |
Upper limit threshold value as a percentage of the maximum possible value. |
detail |
Falling threshold |
Lower limit threshold value as a percentage of the maximum possible value. |
detail |
Rising event index |
Event triggered when the rising threshold is crossed. |
detail |
Falling event index |
Event triggered when the falling threshold is crossed. |
detail |
Sample Output
show snmp health-monitor
user@host> show snmp health-monitor
Alarm
Index Variable description Value State
32768 Health Monitor: root file system utilization
jnxHrStoragePercentUsed.1 58 active
32769 Health Monitor: /config file system utilization
jnxHrStoragePercentUsed.2 0 active
32770 Health Monitor: RE 0 CPU utilization
jnxOperatingCPU.9.1.0.0 0 active
32773 Health Monitor: RE 0 Memory utilization
jnxOperatingBuffer.9.1.0.0 35 active
32775 Health Monitor: jkernel daemon CPU utilization
Init daemon 0 active
Chassis daemon 50 active
Firewall daemon 0 active
Interface daemon 5 active
SNMP daemon 11 active
MIB2 daemon 42 active
Sonet APS daemon 0 active
VRRP daemon 0 active
Alarm daemon 3 active
PFE daemon 0 active
CRAFT daemon 0 active
Traffic sampling control daemon 0 active
Ilmi daemon 0 active
Remote operations daemon 0 active
CoS daemon 0 active
Pic Services Logging daemon 0 active
Internal Routing Service Daemon 3 active
Network Access Service daemon 0 active
Forwarding UDP daemon 0 active
Routing socket proxy daemon 0 active
Disk Monitoring daemon 1 active
Inet daemon 0 active
Syslog daemon 0 active
Adaptive Services PIC daemon 0 active
ECC parity errors logging Daemon 0 active
Layer 2 Tunneling Protocol daemon 0 active
PPPoE daemon 3 active
Redundancy device daemon 0 active
PPP daemon 0 active
Dynamic Flow Capture Daemon 0 active
32776 Health Monitor: jroute daemon CPU utilization
Routing protocol daemon 1 active
Management daemon 0 active
Management daemon 0 active
Command line interface 4 active
Periodic Packet Management daemon 0 active
Link Management daemon 0 active
Pragmatic General Multicast daemon 0 active
Bidirectional Forwarding Detection daemon 0 active
SRC daemon 0 active
audit daemon 0 active
Event daemon 0 active
32777 Health Monitor: jcrypto daemon CPU utilization
IPSec Key Management daemon 0 active
32779 Health Monitor: jkernel daemon Memory utilization
Init daemon 47384 active
Chassis daemon 20204 active
Firewall daemon 1956 active
Interface daemon 3340 active
SNMP daemon 4540 active
MIB2 daemon 3880 active
Sonet APS daemon 2632 active
VRRP daemon 2672 active
Alarm daemon 1856 active
PFE daemon 2600 active
CRAFT daemon 2000 active
Traffic sampling control daemon 3164 active
Ilmi daemon 2132 active
Remote operations daemon 2964 active
CoS daemon 3044 active
Pic Services Logging daemon 1944 active
Internal Routing Service Daemon 1392 active
Network Access Service daemon 1992 active
Forwarding UDP daemon 1876 active
Routing socket proxy daemon 1296 active
Disk Monitoring daemon 1180 active
Inet daemon 1296 active
Syslog daemon 1180 active
Adaptive Services PIC daemon 3220 active
ECC parity errors logging Daemon 1100 active
Layer 2 Tunneling Protocol daemon 3372 active
PPPoE daemon 1424 active
Redundancy device daemon 1820 active
PPP daemon 2060 active
Dynamic Flow Capture Daemon 10740 active
32780 Health Monitor: jroute daemon Memory utilization
Routing protocol daemon 8104 active
Management daemon 13360 active
Management daemon 19252 active
Command line interface 9912 active
Periodic Packet Management daemon 1484 active
Link Management daemon 2016 active
Pragmatic General Multicast daemon 1968 active
Bidirectional Forwarding Detection daemon 1956 active
SRC daemon 1772 active
audit daemon 1772 active
Event daemon 1808 active
32781 Health Monitor: jcrypto daemon Memory utilization
IPSec Key Management daemon 5600 active
show snmp health-monitor alarms detail
user@host> show snmp health-monitor alarms detail
Alarm Index 32768:
Variable name jnxHrStoragePercentUsed.1
Variable OID 1.3.6.1.4.1.2636.3.31.1.1.1.1.1
Sample type absolute value
Startup alarm rising alarm
Owner Health Monitor: root file system
utilization
Creator Health Monitor
State active
Sample interval 300 seconds
Rising threshold 80
Falling threshold 70
Rising event index 32768
Falling event index 32768
Instance Value: 58
Instance State: active
Alarm Index 32769:
Variable name jnxHrStoragePercentUsed.2
Variable OID 1.3.6.1.4.1.2636.3.31.1.1.1.1.2
Sample type absolute value
Startup alarm rising alarm
Owner Health Monitor: /config file system
utilization
Creator Health Monitor
State active
Sample interval 300 seconds
Rising threshold 80
Falling threshold 70
Rising event index 32768
Falling event index 32768
Instance Value: 0
Instance State: active
Alarm Index 32770:
Variable name jnxOperatingCPU.9.1.0.0
Variable OID 1.3.6.1.4.1.2636.3.1.13.1.8.9.1.0.0
Sample type absolute value
Startup alarm rising alarm
Owner Health Monitor: RE 0 CPU utilization
Creator Health Monitor
State active
Sample interval 300 seconds
Rising threshold 80
Falling threshold 70
Rising event index 32768
Falling event index 32768
Instance Value: 0
Instance State: active
Alarm Index 32773:
Variable name jnxOperatingBuffer.9.1.0.0
Variable OID 1.3.6.1.4.1.2636.3.1.13.1.11.9.1.0.0
Sample type absolute value
Startup alarm rising alarm
Owner Health Monitor: RE 0 Memory utilization
Creator Health Monitor
State active
Sample interval 300 seconds
Rising threshold 80
Falling threshold 70
Rising event index 32768
Falling event index 32768
Instance Value: 35
Instance State: active
Alarm Index 32775:
Variable name sysApplElmtRunCPU.3
Variable OID 1.3.6.1.2.1.54.1.2.3.1.9.3
Sample type delta value
Startup alarm rising alarm
Owner Health Monitor: jkernel daemon CPU
utilization
Creator Health Monitor
State active
Sample interval 300 seconds
Rising threshold 24000
Falling threshold 21000
Rising event index 32768
Falling event index 32768
Instance Name: sysApplElmtRunCPU.3.1.1
Instance Description: Init daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.2.2786
Instance Description: Chassis daemon
Instance Value: 50
Instance State: active
Instance Name: sysApplElmtRunCPU.3.3.2938
Instance Description: Firewall daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.4.2942
Instance Description: Interface daemon
Instance Value: 5
Instance State: active
Instance Name: sysApplElmtRunCPU.3.7.7332
Instance Description: SNMP daemon
Instance Value: 11
Instance State: active
Instance Name: sysApplElmtRunCPU.3.9.2914
Instance Description: MIB2 daemon
Instance Value: 42
Instance State: active
Instance Name: sysApplElmtRunCPU.3.12.2916
Instance Description: Sonet APS daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.13.2917
Instance Description: VRRP daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.14.2787
Instance Description: Alarm daemon
Instance Value: 3
Instance State: active
Instance Name: sysApplElmtRunCPU.3.15.2940
Instance Description: PFE daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.16.2788
Instance Description: CRAFT daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.17.2918
Instance Description: Traffic sampling control daemon
---(more 23%)---
Release Information
Command introduced in Junos OS Release 8.0.