show sflow
Syntax
show sflow <collector> <interface>
Description
Display sFlow configuration information.
Options
none | Display all sFlow configuration information. |
collector | (Optional) Display a list of configured sFlow collectors and their properties. See show sflow collector. |
interface | (Optional) Display the interfaces on which sFlow technology is enabled and the sampling parameters. See show sflow interface. |
Required Privilege Level
view
Output Fields
Table 1 lists the
output fields for the show sflow
command. Output fields
are listed in the approximate order in which they appear.
Field Name |
Field Description |
---|---|
|
Status of the feature: |
|
Reverts back to the previously configured adaptive sample rate. Adaptive fallback is triggered when the number of samples per second for each FPC is less than the sample-limit threshold value. This option is disabled by default. |
|
Number of packets sampled per second. This sample limit cannot be configured and is set to 300 packets per second. |
|
Threshold value that you explicitly configure for adaptive sampling fallback. |
|
Interval at which the sFlow agent polls the interface. |
|
Rate at which egress packets are sampled. |
|
Rate at which ingress packets are sampled. |
|
IP address assigned to the sFlow agent. |
|
Source IP address for the sFlow packets. |
|
IPv6 address assigned to the sFlow agent. |
|
Source IPv6 address for the sFlow packets. |
Sample Output
show sflow
user@host> show sflow sFlow : Enabled Adaptive fallback : Disabled Sample limit : 300 packets/second Sample limit threshold : 150 packets/second Polling interval : 20 second Sample rate egress : 1:2048: Disabled Sample rate ingress : 1:1000: Enabled Agent ID : 10.93.54.7 Source IP address : 10.93.54.7
Release Information
Command introduced in Junos OS Release 9.3.