show security monitoring fpc fpc-number
Syntax
show security monitoring fpcfpc-number<node (node-id| all | local | primary)>
Description
Display security monitoring information about the FPC slot.
Options
fpc-number—Display security monitoring information for the specified FPC slot. It can be in the range from 0 to 11.node—(Optional) For chassis cluster configurations, display security monitoring information for the specified FPC on a specific node (device) in the cluster.node-id—Identification number of the node. It can be 0 or 1.all—Display information about all nodes.local—Display information about the local node.primary—Display information about the primary node.
Additional Information
For complete list of slot numbering, physical port, and logical interface numbering for SRX Series Firewalls in chassis cluster, see Chassis Cluster User Guide for SRX Series Devices.
Required Privilege Level
view
Output Fields
Table 1 lists the output
fields for the show security monitoring fpc fpc-number command. Output fields are listed in the approximate order
in which they appear.
Field Name |
Field Description |
|---|---|
|
Slot number in which the FPC is installed. |
|
Slot number in which the PIC is installed. |
|
Total percentage of CPU being used by the PIC's processors. |
|
Percentage of heap space (dynamic memory) being used by the PIC's processor. If this number exceeds 80 percent, there might be a software problem (memory leak). |
|
The current number of flow sessions. When SRX Series Firewalls operate in packet mode, flow sessions will not be created and this field will remain zero. |
|
The maximum number of flow sessions allowed. This number will differ from one device to another. |
|
The current number of cp sessions for the SPU (on SRX5600, and SRX5800 devices only). |
|
The maximum number of cp sessions allowed for the SPU (on SRX5600, and SRX5800 devices only). |
Sample Output
show security monitoring fpc 0
user@host> show security monitoring fpc 0
FPC 0
PIC 0
CPU utilization : 0 %
Memory utilization : 82 %
Current flow session : 0
Max flow session : 0
Current CP session : 0
Max CP session : 12000000
Session Creation Per Second (for last 96 seconds on average): 0
PIC 1
CPU utilization : 0 %
Memory utilization : 54 %
Current flow session : 0
Max flow session : 819200
Current CP session : 0
Max CP session : 0
Session Creation Per Second (for last 96 seconds on average): 0
Sample Output
show security monitoring fpc 1
user@host> show security monitoring fpc 1
FPC 1
PIC 0
CPU utilization : 0 %
Memory utilization : 21 %
Current flow session : 0
Max flow session : 524288
Current CP session : 0
Max CP session : 1048576
Session Creation Per Second (for last 96 seconds on average): 0
Sample Output
show security monitoring fpc 8
user@host> show security monitoring fpc 5
FPC 5
PIC 0
CPU utilization : 0 %
Memory utilization : 64 %
Current flow session : 0
Max flow session : 524288
Current CP session : 0
Max CP session : 2359296
Session Creation Per Second (for last 96 seconds on average): 0
PIC 1
CPU utilization : 0 %
Memory utilization : 65 %
Current flow session : 0
Max flow session : 1048576
Current CP session : 0
Max CP session : 0
Session Creation Per Second (for last 96 seconds on average): 0
Release Information
Command introduced in Junos OS Release 9.2.