show oam ethernet fnp messages
Syntax
show oam ethernet fnp messages
<interface interface-name>
<routing instance routing-instance-name>
Description
On MX Series routers with Gigabit Ethernet or aggregated Ethernet PICs, displays OAM Ethernet Failure Notification Protocol (FNP) messages.
Options
| interface-name | (Optional) Display Ethernet FNP messages for the specified Ethernet interface only. |
| routing-instance-name | (Optional) Display FNP messages for the specified routing instance. |
Required Privilege Level
view
Output Fields
Table 1 lists
the output fields for the show oam ethernet fnp messages command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
|---|---|
Message from source MAC address |
The source MAC address of the message. |
Originating port number |
Port number of the original message. |
Time since last message |
Elapsed time in hours, minutes, and seconds since the last message was received. |
Time since last message update |
Elapsed time in hours, minutes, and seconds since the last message was updated. |
Total messages received |
Number of messages received. |
Domain ID |
Domain ID of the message. |
STP Root ID |
The spanning tree Root ID of the message. |
Trigger Reason |
The reason why the message was triggered. |
Effected VLANs |
Number of VLANs that are affected. |
Disabled interfaces |
Name of the interfaces that are disabled. |
Sample Output
show oam ethernet fnp messages
user@host> show oam ethernet fnp messages
Active FNP messages on interface lsi.1054465
Message source MAC: a0:aa:aa:aa:aa:aa
Originating port number: 141077
Time since last message: 00:00:00
Time since last message update: 00:00:00
Total messages received: 1
Domain ID: 0
STP Root ID: 0.f0:ff:ff:ff:ff:ff
Trigger reason: todo
Effected VLANs: 10
Disabled interfaces:
Interface VLAN
ge-0/0/0.10 10
Release Information
Command introduced in Junos OS Release 11.4