Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

traps

Syntax

Hierarchy Level

Description

Set the trap bit to generate traps for probes. Traps are sent if the configured threshold is met or exceeded.

Options

traps—Specify one or more traps. The following options are supported:

  • control-connection-closed—Generate traps when the control connection is closed.

  • egress-jitter-exceeded—Generate traps when the jitter in egress time threshold is met or exceeded.

  • egress-std-dev-exceeded—Generate traps when the egress time standard deviation threshold is met or exceeded.

  • egress-time-exceeded—Generate traps when the maximum egress time threshold is met or exceeded.

  • ingress-jitter-exceeded—Generate traps when the jitter in ingress time threshold is met or exceeded.

  • ingress-std-dev-exceeded—Generate traps when the ingress time standard deviation threshold is met or exceeded.

  • ingress-time-exceeded—Generate traps when the maximum ingress time threshold is met or exceeded.

  • jitter-exceeded—Generate traps when the jitter in round-trip time threshold is met or exceeded.

  • probe-failure—Generate traps when successive probe loss thresholds are crossed.

  • rtt-exceeded—Generate traps when the maximum round-trip time threshold is met or exceeded.

  • std-dev-exceeded—Generate traps when the round-trip time standard deviation threshold is met or exceeded.

  • test-completion—Generate traps when a test is completed.

  • test-failure—Generate traps when the total probe loss threshold is met or exceeded.

  • test-iteration-done—Generate traps when all test sessions under control connections complete one test iteration.

Note:

For RPM traps to be generated, you must configure the remote-operations SNMP trap category by including the categories statement at the [edit snmp trap-group trap-group-name] hierarchy level.

Required Privilege Level

system—To view this statement in the configuration.

system-control—To add this statement to the configuration.

Release Information

Statement introduced before Junos OS Release 7.4.

Support at the [edit services rpm twamp client control-connection control-client-name] hierarchy level introduced in Junos OS Release 15.1 for MX Series routers.