topology (OSPF Interface)
Syntax
topology (ipv4-multicast | name) {
metric metric;
}
Hierarchy Level
[edit logical-systems logical-system-name protocols ospf area area-id interface interface-name], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols ospf area area-id interface interface-name], [edit protocols ospf area area-id interface interface-name], [edit routing-instances routing-instance-name protocols ospf area area-id interface interface-name]
Description
Configure interface-specific properties for multitopology OSPF, including topology-specific metric values for an interface.
All OSPF interfaces have a cost, which is a routing metric that is used in the link-state calculation. Routes with lower total path metrics are preferred over those with higher path metrics. The default value for the OSPF metric for an interface is 1. You can modify the default value for an OSPF interface and configure a topology-specific metric for that interface. The topology-specific metric applies to routes advertised from the interface that belong only to that topology.
Default
The default value of the topology metric is the same as the default metric value calculated by OSPF or the value configured for the OSPF metric.
Options
ipv4-multicast—Name of the topology for IPv4 multicast traffic.
name—Name of a topology
created under the [edit routing-options] hierarchy level.
metric metric—Cost of a route from an OSPF interface. You can specify a metric value for a topology that is different from the value specified for the interface.
Range: 1 through 65,535
Default: 1
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.0.