igmp-querier (QFabric Systems only)
Syntax
igmp-querier {
source-addresssource address;
}
Hierarchy Level
[edit protocols igmp-snooping vlan vlan-name]
Description
Configure a QFabric Node device to be an IGMP querier. If there are any multicast routers on the same local network, make sure the source address for the IGMP querier is lower (a smaller number) than the IP addresses for those routers on the network. This ensures that Node is always the IGMP querier on the network.
Options
| source-address source address | The address that the switch uses as the source address in the IGMP queries that it sends. |
Required Privilege Level
routing—To view this statement in the configuration.routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 14.1X53-D15.