pim-to-mld-proxy
Syntax
pim-to-mld-proxy {
upstream-interface [ interface-names ];
}
Hierarchy Level
[edit logical-systems logical-system-name routing-instances routing-instance-name routing-options multicast], [edit logical-systems logical-system-name routing-options multicast], [edit routing-instances routing-instance-name routing-options multicast], [edit routing-options multicast]
Description
Configure the rendezvous point (RP) routing device
that resides between a customer edge–facing Protocol Independent
Multicast (PIM) domain and a core-facing PIM domain to translate PIM
join or prune messages into corresponding Multicast Listener Discovery
(MLD) report or leave messages. The routing device then transmits
the report or leave messages by proxying them to one or two upstream
interfaces that you configure on the RP routing device. Including
the pim-to-mld-proxy statement enables you to use MLD to
forward IPv6 multicast traffic across the PIM sparse mode domains.
The remaining statement is explained separately. See CLI Explorer.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.6.