Removing the Outer and Inner VLAN Tags
On Ethernet IQ, IQ2 and IQ2-E interfaces, on MX Series router Gigabit Ethernet, Tri-Rate
Ethernet copper, and 10-Gigabit Ethernet interfaces, and on aggregated Ethernet interfaces
using Gigabit Ethernet IQ2 and IQ2-E or 10-Gigabit Ethernet PICs on MX Series routers, to
remove both the outer and inner VLAN tags of the frame, include the pop-pop
statement in the input VLAN map or output VLAN map:
pop-pop;
You can include this statement at the following hierarchy levels:
-
[edit interfaces interface-name unit logical-unit-number input-vlan-map]
-
[edit interfaces interface-name unit logical-unit-number output-vlan-map]
-
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number input-vlan-map]
-
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number output-vlan-map]