show lldp
Syntax
show lldp <detail>
Description
Display information about the Link Layer Discovery Protocol (LLDP).
Options
detail | (Optional) Display the detailed output level. |
Required Privilege Level
view
Output Fields
Table 1 describes
the output fields for the show lldp
command. Output fields
are listed in the approximate order in which they appear.
Field Name |
Field Description |
---|---|
LLDP |
Status of LLDP: Enabled or Disabled. |
Advertisement interval |
Value of the advertisement interval parameter. |
Transmit delay |
Value of the transmit delay parameter. |
Hold timer |
Value of the hold timer parameter. |
Notification interval |
Value of the notification interval parameter. |
Config Trap Interval |
Value of the configuration trap parameter. |
Connection Hold timer |
Value of the connection hold timer parameter. |
|
|
Port Description TLV type |
Following value used for port description TLV:
|
Interface |
Name of the interface for which LLDP configuration information is being reported For information about interface names, see Interface Naming Overview. For information about interface names for TX Matrix routers, see TX Matrix Router Chassis and Interface Names. For information about FPC numbering on TX Matrix routers, see Routing Matrix with a TX Matrix Router FPC Numbering. |
|
Name of the aggregated Ethernet interface, if any, to which the interface belongs. |
|
LLDP operating state. The state can be Enabled or Disabled. |
|
LLDP-MED operating state. The state can be Enabled or Disabled. |
|
LLDP power negotiation operating state. The state can be Enabled or Disabled. |
LLDP basic TLVs supported |
List of basic LLDP TLVs supported by this device (detail only). |
LLDP 802 TLVs supported |
List of IEEE 802.1 LLDP TLVs supported by this device (detail only). |
Sample Output
show lldp
user@host> show lldp LLDP : Enabled Advertisement interval : 30 seconds Transmit delay : 2 seconds Hold timer : 120 seconds Notification interval : 0 Second(s) Config Trap Interval : 0 seconds Connection Hold timer : 300 seconds Port ID TLV subtype : locally-assigned Port Description TLV type : interface-description (ifDescr) Interface Parent Interface LLDP LLDP-MED Power Negotiation all - Enabled
Sample Output
show lldp detail
user@host> show lldp detail LLDP : Enabled Advertisement interval : 30 seconds Transmit delay : 2 seconds Hold timer : 120 seconds Notification interval : 0 Second(s) Config Trap Interval : 0 seconds Connection Hold timer : 300 seconds Port ID TLV subtype : locally-assigned Port Description TLV type : interface-description (ifDescr) Interface Parent Interface LLDP LLDP-MED Power Negotiation Neighbor count all - Enabled 2 Interface Parent Interface Vlan-id Vlan-name xe-0/0/0 - 4080 vlan-4080 xe-0/0/1 - 4080 vlan-4080 Basic Management TLVs supported: End Of LLDPDU, Chassis ID, Port ID, Time To Live, Port Description, System Name, System Description, System Capabilities, Management Address Organizationally Specific TLVs supported: Port VLAN tag, VLAN Name, MAC/PHY Configuration/Status, Link Aggregation,Maximum Frame Size
Release Information
Command introduced in Junos OS Release 9.6.