te-class-matrix
Syntax
te-class-matrix {
tenumber {
priority priority;
traffic-class {
ctnumber priority priority;
}
}
}
Hierarchy Level
[edit logical-systems logical-system-name protocols mpls diffserv-te], [edit protocols mpls diffserv-te]
Description
Specify the traffic engineering class matrix for a multiclass LSP or a DiffServ-aware traffic engineering LSP.
Default
The default traffic engineering class matrix is:
te-class-matrix {
te0 traffic-class ct0 priority 7;
te1 traffic-class ct1 priority 7;
te2 traffic-class ct2 priority 7;
te3 traffic-class ct3 priority 7;
te4 traffic-class ct0 priority 0;
te5 traffic-class ct1 priority 0;
te6 traffic-class ct2 priority 0;
te7 traffic-class ct3 priority 0;
}
If you define any of the traffic engineering classes, all the default values are dropped.
Options
ctnumber—Specify
the number of the class type. It can be one of four values: ct0, ct1, ct2, or ct3.
priority priority—Specify
the priority of the class type. It can be one of eight values from
0 through 7.
tenumber—Specify the number
of the traffic engineering class. It can be one of eight values: te0, te1, te2, te3, te4, te5, te6, or te7. You must configure
the traffic engineering classes in order, starting with te0.
traffic-class—Specify the traffic class for
the traffic engineering class.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.