record
Syntax
(record | no-record);
Hierarchy Level
[edit logical-systems logical-system-name protocols mpls], [edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name], [edit logical-systems logical-system-name protocols mpls label-switched-path (primary | secondary) path-name], [edit protocols mpls], [edit protocols mpls label-switched-path lsp-name], [edit protocols mpls label-switched-path lsp-name (primary | secondary) path-name]
Description
Specify whether an LSP should actively record the path by sending the record route object (RRO). The RRO is used to record the path that the LSP traverses. It includes the IP address and router/node ID of each RSVP node in the path. Recording the LSP path can be useful for diagnostics and also provides loop detection.
Default
Recording LSP path is enabled by default.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.