optimize-adaptive-teardown
Syntax
optimize-adaptive-teardown {
p2p:
delay value (3..65535 seconds)
}
Hierarchy Level
[edit protocols mpls]
Description
Make use of a new feedback mechanism from TAG library
which relies on RPD infrastructure to decide when all the routes using
the old LSP instance have fully shifted to the new LSP instance after
MBB switchover. When this statement is configured, the optimize-hold-dead-delay statement, which delays the teardown of the old LSP instance after
MBB switchover, is ignored.
Options
p2p |
Only point-to-point LSPs configured in the system will be affected. |
delay |
Delays the tearing down of old optimized LSP paths based on the configured value.
|
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 15.1R1.