Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show mpls association

Syntax

Description

Display the Multiprotocol Label Switching (MPLS) label-switched paths (LSPs) based on the association with an incoming or outgoing LSP interface. The command output displays the list of RSVP-TE LSPs carrying traffic in and out of the same interface.

Options

iif incoming-interface-name

Display list of RSVP-TE LSPs that share the specified incoming interface to bring in traffic. This option works on transit label-switching routers (LSRs) and egress label edge routers (LERs).

oif outgoing-interface-name

Display list of RSVP-TE LSPs that share the specified outgoing interface to carry out traffic. This option works on ingress LERs and transit LSRs.

logical-system (all | logical-system-name)

(Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

view

Output Fields

Table 1 describes the output fields for the show mpls association command. Output fields are listed in the approximate order in which they appear.

Table 1: show mpls association Output Fields

Field Name

Field Description

To

Destination IP address of the corresponding LSP.

From

Source IP address of the corresponding LSP.

State

State of the corresponding LSP handled by this RSVP session: Up, Dn (down), or Restart.

LSPname

Name of the LSP.

Sample Output

show mpls association iif

show mpls association oif

Release Information

Command introduced in Junos OS Release 16.1 .