show interfaces mc-ae
Syntax
show interfaces mc-ae id identifier unit number
Description
On peers with multichassis aggregated Ethernet (mc-aeX) interfaces, use this command to display information about the multichassis aggregated Ethernet interfaces.
In Junos OS Release 17.4R1, this command is not supported on EX4300, EX9200, PTX10000, QFX10002, and QFX10008 devices.
Options
| id identifier | (Optional) Specify the name of the multichassis aggregated Ethernet interface. |
| unit number | (Optional) Specify the logical interface by unit number. |
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show interfaces mc-ae command. Output fields are listed in the approximate order in which
they appear.
Output Field Name |
Field Description |
|---|---|
Current State Machine’s State |
Specifies the state of the MC-LAG initialization state machine. |
|
Specifies the status of the MC-LAG configuration consistency
check feature. The status is either |
Member Link |
Specifies the identifiers of the configured multichassis link aggregated interface members. |
Local Status |
Specifies the status of the local link: active or standby. |
Peer Status |
Specifies the status of the peer link: active or standby. |
Peer State |
Specifies the status of the local and peer links in an active/active MC-LAG configuration. |
Logical Interface |
Specifies the identifier and unit of the AE interface. |
Topology Type |
Specifies the bridge configured on the AE. |
Local State |
Specifies if the local device is up or down. |
Peer State |
Specifies if the peer device is up or down. |
Peer Ip/MCP/State |
Specifies the multichassis protection (MCP) link or the interchassis link-protection link (ICL-PL) for all of the multichassis aggregated Ethernet interfaces that are part of the peer. |
Sample Output
- show interfaces mc-ae (EX Series )
- show interfaces mc-ae (MX Series)
- show interfaces mc-ae (Active/Active Bridging and VRRP over IRB on MX Series)
show interfaces mc-ae (EX Series )
user@switch> show interfaces mc-ae ae1 512
Member Link : ae1
Current State Machine's State: mcae active state
Configuration Consistency Check : Failed (redundancy group id mismatch)
Local Status : active
Local State : up
Peer Status : standby
Peer State : up
Logical Interface : ae1.0
Topology Type : bridge
Local State : up
Peer State : up
Peer Ip/MCP/State : 10.1.1.1 ae0.0 up
show interfaces mc-ae (MX Series)
user@host> show interfaces mc-ae ae0 unit 512 Member Links : ae0 Local Status : active Peer Status : active Logical Interface : ae0.512 Core Facing Interface : Label Ethernet Interface ICL-PL : Label Ethernet Interface
show interfaces mc-ae (Active/Active Bridging and VRRP over IRB on MX Series)
user@host# show interfaces mc-ae ge-0/0/0.0
Member Link : ae0
Current State Machine's State: active
Local Status : active
Local State : up
Peer Status : active
Peer State : up
Logical Interface : ae0.0
Topology Type : bridge
Local State : up
Peer State : up
Peer Ip/ICL-PL/State : 192.168.100.10 ge-0/0/0.0 up
Release Information
Command introduced in Junos OS Release 9.6.
Configuration Consistency Check output field added
in Junos OS Release 15.1X53-D60 for the QFX Series.