groups
Syntax
groups {
group-name {
configuration-data;
when {
chassis chassis-id;
member member-id;
model model-id;
node node-id;
peers [ names-of-peers ]
routing-engine routing-engine-id;
time <start-time> [to <end-time>];
}
conditional-data;
}
lccn-re0 {
configuration-data;
}
lccn-re1 {
configuration-data;
}
}
Hierarchy Level
[edit]
Description
Create a configuration group.
Junos OS does not support configuring statements corresponding
to third-party YANG data models, for example, OpenConfig or custom
data models, under the [edit groups] hierarchy.
Options
| group-name | Name of the configuration group. To configure multiple groups, specify more than one group name. |
| configuration-data | The configuration statements that are to be applied
elsewhere in the configuration with the |
| when | Define conditions under which the configuration group should be applied. Conditions include the type of chassis, model, or Routing Engine, virtual chassis member, cluster node, and start and optional end time of day. If you specify multiple conditions in a single configuration group, all conditions must be met before the configuration group is applied.
|
| conditional-data | Option introduced in Junos 11.3. The conditional statements that are to be applied when this configuration group is applied. On routers that support multiple Routing Engines, you can also specify two special group names:
On routers that support multiple Routing Engines, you can also specify two special group names: The configuration specified in group (Routing matrix only) The TX Matrix router supports group names for the Routing Engines in each connected T640 router in the following formats: Note:
The management Ethernet interface used for the TX Matrix
Plus router, T1600 routers in a routing matrix, and PTX Series Packet
Transport Routers, is
|
Required Privilege Level
configure—To enter configuration mode.
Release Information
Statement introduced before Junos OS Release 7.4.