static-host-mapping
Syntax
static-host-mapping {
hostname {
alias [ aliases ];
inet [ addresses ];
inet6 [ addresses];
sysid system-identifier;
}
}
Hierarchy Level
[edit system]
Description
(Optional) Statically map a hostname to one or more IP addresses and aliases, and configure an International Organization for Standardization (ISO) system identifier (system ID).
Default
If you do not statically map the hostname, the mapping
is generated dynamically, based on the system configuration. For instance,
if you omit the static-host-mapping hostname sysid statement, the IS-IS system ID is dynamically generated
from the host portion of the ISO address configured on the loopback
interface (lo0) and is mapped to the host-name statement
configured at the [edit system] hierarchy level.
Options
| alias alias | Alias for the hostname. |
| hostname | Fully qualified hostname. |
| inet address | IP address. You can specify one or more IP addresses for the host. |
| sysid system-identifier | ISO system identifier (system ID). This is the 6-byte portion of the Intermediate System-to-Intermediate System (IS-IS) network service access point (NSAP). We recommend that you use the host’s IP address represented in binary-coded decimal (BCD) format. For example, the IP address 208.197.169.18 is 2081.9716.9018 in BCD. |
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.