Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show system statistics

Syntax

Syntax (EX Series Switches)

Syntax (TX Matrix Router)

Syntax (TX Matrix Plus Router)

Syntax (MX Series Router)

Syntax (QFX Series)

Description

Display system-wide protocol-related statistics.

Options

The following are all possible options for the show system statistics command. The available options vary depending on the platform, software release, and operating system (Junos OS and Junos OS Evolved).

Note:

Use the show system statistics ? command to determine the available options.

none

Display system statistics for all the following protocols:

  • arp—Address Resolution Protocol

  • backup - Statistics of backup JunosVM or RE

  • bridge—IEEE 802.1 Bridging

  • clns—Connectionless Network Service

  • esis—End System-to-Intermediate System

  • ethoamcfm—Ethernet OAM protocol for connectivity fault management

  • ethoamlfm—Ethernet OAM protocol for link fault management

  • extended—System statistics for IPv4 and IPv6 traffic

  • icmp—Internet Control Message Protocol

  • icmp6—Internet Control Message Protocol version 6

  • igmp—Internet Group Management Protocol

  • ip—Internet Protocol version 4

  • ip6—Internet Protocol version 6

  • jsr—Juniper Socket Replication

  • jtd - Show jtd statistics

  • mpls—Multiprotocol Label Switching

  • rdp—Reliable Datagram Protocol

  • tcp—Transmission Control Protocol

  • tnp—Trivial Network Protocol

  • ttp—TNP Tunneling Protocol

  • tudp—Trivial User Datagram Protocol

  • udp—User Datagram Protocol

  • vpls—Virtual Private LAN Service

all-chassis

(TX Matrix and TX Matrix Plus routers only) (Optional) Display system statistics for a protocol for all the routers in the chassis.

all-lcc

(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router, display system statistics for a protocol for all T640 routers (or line-card chassis) connected to the TX Matrix router. On a TX Matrix Plus router, display system statistics for a protocol for all routers (line-card chassis) connected to the TX Matrix Plus router

all-members

(EX4200 switches and MX Series routers only) (Optional) Display system statistics for a protocol for all members of the Virtual Chassis configuration.

lcc number

(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router, display system statistics for a protocol for a specific T640 router that is connected to the TX Matrix router. On a TX Matrix Plus router, display system statistics for a protocol for a specific router that is connected to the TX Matrix Plus router.

Replace number with the following values depending on the LCC configuration:

  • 0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix.

  • 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a routing matrix.

  • 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

  • 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

local

(EX4200 switches and MX Series routers only) (Optional) Display system statistics for a protocol for the local Virtual Chassis member.

member member-id

(EX4200 switches and MX Series routers only) (Optional) Display system statistics for a protocol for the specified member of the Virtual Chassis configuration. For EX4200 switches, replace member-id with a value from 0 through 9. For an MX Series Virtual Chassis, replace member-id with a value of 0 or 1.

scc

(TX Matrix routers only) (Optional) Display system statistics for a protocol for the TX Matrix router (or switch-card chassis).

sfc number

(TX Matrix Plus routers only) (Optional) Display system statistics for a protocol for the TX Matrix Plus router (or switch-fabric chassis). Replace number with 0.

Additional Information

By default, when you issue the show system statistics command on a TX Matrix or TX Matrix Plus primary Routing Engine, the command is broadcast to all the T640 (in a routing matrix based on the TX Matrix router) or T1600 (in a routing matrix based on the TX Matrix Plus router) primary Routing Engines connected to it. Likewise, if you issue the same command on the TX Matrix or TX Matrix Plus backup Routing Engine, the command is broadcast to all the T640 (in a routing matrix based on the TX Matrix router) or T1600 (in a routing matrix based on the TX Matrix Plus router) backup Routing Engines that are connected to it.

Required Privilege Level

view

Sample Output

show system statistics

Release Information

Command introduced before JUNOS Release 7.4.

sfc option introduced for the TX Matrix Plus router in JUNOS Release 9.6.