Manage Chassis Component Status on SRX Series Firewalls: Online and Offline Operations
Learn how to manage and restart chassis component and verify the operational status on an SRX Series Firewall.
You can use the request commands to bring chassis components (except Power
Entry Modules and fans) online and offline.
To bring chassis components online and offline, enter these request
chassis commands:
user@host> request chassis <fru> slot <slot#> pic <pic#> online
user@host> request chassis <fru> slot <slot#> pic <pic#> online
In each of the preceding request chassis commands, for SRX300, SRX320, SRX340, SRX345, and
SRX380 Firewalls, <fru> can be fpc. With this
command, you can change the Flexible PIC Concentrator (FPC) status.
-
fpc—Changes the Flexible PIC Concentrator (FPC) status.
In each of the preceding request chassis commands, for SRX5800, SRX5600, and SRX5400 Firewalls, <fru> can be any of one of these values (?):
-
cb—Changes the control board status. -
fabric—Changes the fabric status. -
fpc—Changes the Flexible PIC Concentrator (FPC) status. -
fpm—Changes the craft interface status. -
pic—Changes the physical interface card status. -
routing-engine—Changes the routing engine status.
The request chassis command is not supported for bringing SPCs online and
offline.
Example:
To bring specific PIC and the corresponding FPC slot online, from operational mode, enter
the following request chassis command:
user@host> request chassis pic pic-slot 1 fpc-slot 1 online
Restart the Chassis on SRX Series Firewalls
You can restart the chassis by using the restart chassis-control command
with the following options:
-
To restart the process gracefully:
user@host> restart chassis-control gracefully -
To restart the process immediately:
user@host> restart chassis-control immediately -
To restart the process softly:
user@host> restart chassis-control soft