request vmhost zeroize
Syntax
request vmhost zeroize <re0 | re1> <routing-engine>
Description
Remove all configuration information on the Routing Engines and reset all key values. If the device has dual Routing Engines, the command is broadcast to both Routing Engines on the device. The command removes all data files, including customized configuration and log files, by unlinking the files from their directories. The command removes all user-created files from the system including all plain-text passwords, secrets, and private keys for SSH, local encryption, local authentication, IPsec, RADIUS, TACACS+, and SNMP.
This command reboots the device and sets it to the factory-default configuration. After the reboot, you cannot access the device through the management Ethernet interface. Log in through the console as the root user and start the Junos OS CLI by typing cli at the prompt.
Options
none—Remove all configuration information on all the Routing Engines and reset all key values.
| re0 | re1 | (Optional)
Remove all configuration information on the Routing Engine in slot
0 ( Note:
The QFX10002-60C and PTX10002-60C devices do not have primary and backup routing engines. |
| routing-engine | (Optional) Remove all configuration information on the specified Routing Engine. The following options are available:
|
Required Privilege Level
maintenance
Sample Output
request vmhost zeroize
user@host> request vmhost zeroize VMHost Zeroization : Erase all data, including configuration and log files ? [yes,no] (no) yes re0: -------------------------------------------------------------------------- warning: Vmhost will reboot and may not boot without configuration warning: Proceeding with vmhost zeroize Zeroise secondary internal disk ... Proceeding with zeroize on secondary disk Mounting device in preparation for zeroize... Cleaning up target disk for zeroize ... Zeroize done on target disk. Zeroize of secondary disk completed Zeroize primary internal disk ... Proceeding with zeroize on primary disk Mounting device in preparation for zeroize... Cleaning up target disk for zeroize ... Zeroize done on target disk. Zeroize of primary disk completed Zeroize done mv: cannot stat '/tmp/zero-UytUWY/tgt_jlvmrootfs/etc/fstab': No such file or directory mv: cannot stat '/tmp/zero-UytUWY/fstab': No such file or directory mv: cannot stat '/tmp/zero-6gvrWj/tgt_jlvmrootfs/etc/fstab': No such file or directory mv: cannot stat '/tmp/zero-6gvrWj/fstab': No such file or directory warning: Proceeding with vmhost reboot *** FINAL System shutdown message from root@user *** System going down IMMEDIATELY Initiating vmhost reboot... ok Initiating Junos shutdown... shutdown: [pid 8565] Shutdown NOW! ok Junos shutdown is in progress... Shutdown NOW! System shutdown time has arrived\x07\x07 re1: -------------------------------------------------------------------------- warning: Vmhost will reboot and may not boot without configuration warning: Proceeding with vmhost zeroize Zeroise secondary internal disk ... Proceeding with zeroize on secondary disk
Release Information
Command introduced in Junos OS Release 15.1F3.
PTX3000 router supports the Routing and Control Board, RCBPTX.