request system software configuration-restore
Syntax
request system software configuration-restore (path)
Description
Use this command to restore a previously saved configuration and any installation-specific parameters, such as a configuration that you have entered outside of the CLI, director group IP addresses, and the default partition IP address.
Options
path—(QFabric System) Provide
the path to the location of the backup configuration files. The path
can be to a local file, a file on an external flash drive, or an SCP
or FTP destination.
Required Privilege Level
configure—To enter configuration mode, but other required privilege levels depend on where the statement is located in the configuration hierarchy.
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request system software configuration-restore
user@switch request system software configuration-restore ftp://ftp.test.net/test
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 4035 100 4035 0 0 153k 0 --:--:-- --:--:-- --:--:-- 3803k
Release Information
Command introduced in Junos OS Release 11.3.