request system application (Junos OS Evolved)
Syntax
request system application app application-name node node-name restart
Description
Use this command to stop and then start (restart)
an application on the specified node. Use the show system applications command to verify if an application is started or stopped.
Options
app application-name |
Specify the application you want started or stopped. |
node node-name |
Specify the name of the node on which to start or stop the application. |
restart |
Restart the application. |
Make sure to specify the correct node for the application. The sFlow application
(sflowd) runs on the Routing Engine node on PTX10001-36MR
and PTX10003 routers. It runs on the FPC node on PTX10004 and PTX10008
routers.
Additional Information
(PTX10001-36MR only) Starting in Junos OS Evolved Release 23.2R1, when using this
command to restart one of the forwarding applications, such as
evo-cda-bt or evo-aftmand-bt, the restart
causes traffic forwarding to stop until all applications are back to normal. You
might want to restart these forwarding applications if those applications are
leaking memory or file handles. When evo-cda-bt or
evo-aftmand-bt are restarted, other forwarding applications are
restarted as well.
Required Privilege Level
view
Sample Output
request system application app application-name node node-name restart
user@host> request system application app cmdd node fpc0 restart This may affect traffic in the system. Proceed ? [yes,no] (no) yes App cmdd on node fpc0 restart request is submitted
Release Information
Command introduced in Junos OS Evolved Release 18.3R1.