show ipv6 neighbors
Syntax
show ipv6 neighbors
Description
Display information about the IPv6 neighbor cache.
Options
This command has no options.
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show ipv6 neighbors command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
|---|---|
IPv6 Address |
Name of the IPv6 interface. |
Linklayer Address |
Link-layer address. |
State |
State of the link: up, down, incomplete, reachable, stale, or unreachable. |
Exp |
Number of seconds until the entry expires. |
Rtr |
Whether the neighbor is a routing device: yes or no. |
Secure |
Whether this entry was created using the Secure Neighbor Discovery (SEND) protocol: yes or no. |
Interface |
Name of the interface. |
Sample Output
show ipv6 neighbors
user@host> show ipv6 neighbors IPv6 Address Linklayer Address State Exp Rtr Secure Interface 10:1::2 00:00:0a:00:00:00 reachable 17 yes no reth0.0 11:11::2 00:19:e2:4b:61:83 stale 1197 yes no at-1/0/0.0 12:12::2 00:19:e2:4b:61:83 stale 1188 yes no at-3/0/0.0
Release Information
Command introduced in Junos OS Release 12.1X45-D10.