callback-wait-period
Syntax
callback-wait-period time;
Hierarchy Level
[edit interfaces dln unit logical-unit-number dialer-options], [edit logical-systems logical-system-name interfaces dln unit logical-unit-number dialer-options]
Description
On J Series Services Routers with interfaces configured for ISDN with callback, specify the amount of time the dialer waits before calling back the caller. The default wait time is 5 seconds. The wait time is necessary because, when a call is rejected, the switch waits for up to 4 seconds on point-to-multipoint connections to ensure no other device accepts the call before sending the DISCONNECT message to the originator of the call. However, the default time of 5 seconds may not be sufficient for different switches or may not be needed on point-to-point connections.
To configure callback mode, include the callback statement
at the [edit interfaces dln unit logical-unit-number dialer-options] hierarchy level.
If the callback statement is configured, you cannot
use the caller caller-id statement
at the [edit interfaces dln unit logical-unit-number dialer-options] hierarchy level.
Options
time—Time
the dialer waits before calling back the caller.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 7.5.