show services screen ids-option (Next Gen Services)
Syntax
show services screen <ids-option> screen-name logical-system root-logical-system tenant
Description
Display
the configuration information about the specified services screen.
You can configure a ids-option
to enable screen protection
on the MX Series devices.
Options
screen-name
—Name of the screen.logical-system
—Name of the logical system.root-logical-system
—Displays root logical system as default.tenant | all
—Name of the tenant system or all tenants.
Required Privilege Level
view
Output Fields
Sample Output
show services screen ids-option
user@host> show services screen ids-option <option1> Screen object status: Name Value ICMP flood threshold 0 UDP flood threshold 0 TCP winnuke enabled TCP port scan threshold 0 ICMP address sweep threshold 0 TCP sweep threshold 0 UDP sweep threshold 0 IP tear drop enabled TCP SYN flood attack threshold 0 TCP SYN flood alarm threshold 0 TCP SYN flood source threshold 0 TCP SYN flood destination threshold 0 TCP SYN flood timeout 0 ICMP ping of death enabled IP source route option enabled TCP land attack enabled TCP SYN fragment enabled TCP no flag enabled IP unknown protocol enabled IP bad options enabled IP record route option enabled IP timestamp option enabled IP security option enabled IP lose source route option enabled IP stream option enabled ICMP fragmentation enabled ICMP large packet enabled TCP SYN FIN enabled TCP FIN no ACK enabled Session source limit threshold 0 Session destination limit threshold 0 Alarm without drop enabled
Release Information
Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240, MX480 and MX960 with the MX-SPC3 services card.