Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show services nat source mappings address-pooling-paired

Syntax

Description

Displays NAT source mappings address pooling information

Options

address-pooling-paired

(Optional) Display only information about address-pooling paired mappings.

endpoint-independent

(Optional) Display only information about endpoint-independent mappings.

pcp

(Optional) Display only information about port control protocol mappings.

Note:

PCP requests with the prefer-failure option request a particular external IP address and port. When the request cannot be fulfilled, the mapping is not created. In this case, the subscriber does not have a mapped IP address. Such a subscriber is counted in the summary of the number or address mappings, but is not displayed in the list of address mappings, as shown in the following examples:

This is expected behavior because unfulfilled address mappings (IP of 0.0.0.0) are not displayed in the output of the second CLI command. These address mappings will time out based on configured or default values.

Required Privilege Level

view

Sample Output

show services nat source mappings address-pooling-paired

show services nat source mappings address-pooling-paired private 1.1.1.100

show services nat source mappings address-pooling-paired public 30.30.30.2

show services nat source mappings address-pooling-paired pool-name sp1

show services nat mappings address-pooling-paired

show services nat mappings address-pooling-paired (mapping of active B4 for a subscriber)

show services nat mappings endpoint-independent

show services nat mappings pcp

show services nat mappings nptv6 internal

show services nat mappings nptv6 external

Release Information