speed (MX Series DPC)
Syntax
speed (auto | 1Gbps | 100Mbps | 10Mbps);
Hierarchy Level
[edit interfaces ge-fpc/pic/port]
Description
On MX Series routers with Combo Line Rate DPCs
and Tri-Rate Copper SFPs you can set auto negotiation of speed. To
specify the auto negotiation speed, use the speed (auto | 1Gbps
| 100Mbps | 10Mbps) statement under the [edit interface
ge-/fpc/pic/port] hierarchy level. The auto option
will attempt to automatically match the rate of the connected interface.
To set port speed negotiation to a specific rate, set the port speed
to 1Gbps, 100Mbps, or 10Mbps.
If the negotiated speed and the interface speed do not match, the link will not be brought up. Half duplex mode is not supported.
Options
You can specify the speed as either auto (autonegotiate), 10Mbps (10 Mbps), 100Mbps (100 Mbps), or 1Gbps (1 Gbps).
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.5.