lmi (Ethernet OAM)
Syntax
lmi {
status-counter count;
polling-verification-timer value;
interface name {
uni-id uni-name;
status-counter number;
polling-verification-timer value;
evc-map-type (all-to-one-bundling | bundling | service-multiplexing);
evc evc-name {
default-evc;
vlan-list vlan-id-list;
}
}
}
Description
On routers with ge, xe, or ae interfaces, configure an OAM Ethernet Local Management Interface
(E-LMI).
On MX Series routers, E-LMI is supported on Gigabit Ethernet
(ge), 10-Gigabit Ethernet (xe), and Aggregated
Ethernet (ae) interfaces configured on MX Series routers
with DPC only.
Options
status-counter count—Status counter (N393), defaults to 4.
interface name—Polling
verification timer (T392), defaults to 15 seconds.
uni-id uni-name—(Optional)
Defaults to the physical interface name.
status-counter number—(Optional)
Defaults to a global value.
polling-verification-timer value—(Optional) Defaults to a global value.
evc-map-type (all-to-one-bundling | bundling | service-multiplexing)—Specify the Ethernet virtual connection (EVC) map type.
evc evc-name—Specify the
name of the EVC.
default-evc—Set the specified EVC as the default
EVC.
vlan-list vlan-id-list—Specify
a group of VLANs to assign to the EVC.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.5.