link-speed (Aggregated Ethernet)
Syntax
link-speed speed;
Hierarchy Level (EX Series)
[edit interfaces aex aggregated-ether-options], [edit interfaces interface-range name aggregated-ether-options], [edit interfaces interface-range name aggregated-sonet-options]
Description
For aggregated Ethernet interfaces only, set the required link speed.
Options
speed
—For
aggregated Ethernet links, you can specify speed
in bits per second either as a complete decimal number or
as a decimal number followed by the abbreviation k
(1000), m
(1,000,000), or g
(1,000,000,000).
Aggregated Ethernet links on the M120 router can have one of the following speeds:
100m
—Links are 100 Mbps.10g
—Links are 10 Gbps.1g
—Links are 1 Gbps.oc192
—Links are OC192 or STM64c.
Aggregated Ethernet links on EX Series switches can be configured to operate at one of the following speeds:
10m
—Links are 10 Mbps.100m
—Links are 100 Mbps.1g
—Links are 1 Gbps.10g
—Links are 10 Gbps.
Aggregated Ethernet links on T Series, MX Series, PTX Series routers, and QFX5100, QFX10002, QFX10008, and QFX10016 switches can be configured to operate at one of the following speeds:
100g
—Links are 100 Gbps.100m
—Links are 100 Mbps.10g
—Links are 10 Gbps.1g
—Links are 1 Gbps.40g
—Links are 40 Gbps.50g
—Links are 50 Gbps.80g
—Links are 80 Gbps.8g
—Links are 8 Gbps.mixed
—Enables bundling of different Ethernet rate links in the same Aggregated Ethernet interface.oc192
—Links are OC192.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.
mixed
option added in Junos OS Release 15.1F3 and
16.1R2 for PTX5000 routers and 15.1F6 and 16.1R2 for PTX3000 routers.