show interfaces diagnostics optics (Routers)
Syntax
show interfaces diagnostics optics interface-name
Description
Display diagnostics data, warnings, and alarms for Gigabit Ethernet, 10-Gigabit Ethernet, 40-Gigabit Ethernet, 100-Gigabit Ethernet, or Virtual Chassis port interfaces.
Options
interface-name |
Interface name. For example:
|
Additional Information
The transceivers are polled in 1-second intervals for diagnostics data, warnings, and alarms. The alarms do not cause the links to go down or the LEDs to change color, nor generate SNMP traps. Changes in alarm and warning status generate system log messages.
Thresholds that trigger a high alarm, low alarm, high warning, or low warning are set by the transceiver vendors. Generally, a high alarm or low alarm indicates that the optics module is not operating properly. This information can be used to diagnose why a device is not working.
Some transceivers do not support all optical diagnostics features described in the output fields.
If optics measures transmit or receive power as zero, then,
the measured power is displayed as 0.000 mW / - Inf
dBm
You can configure the P2-10G-40G-QSFPP
PIC to operate either in 10-Gigabit Ethernet mode or in 40-Gigabit
Ethernet mode. When the PIC is in 40-Gigabit Ethernet mode, you must
execute the show interfaces diagnostics optics et-fpc/pic/port command.
The output of this command displays the diagnostic optics information
about the corresponding 40-Gigabit Ethernet port of the PIC. However,
when the PIC is in 10-Gigabit Ethernet mode, you must execute the show interfaces diagnostics optics et-fpc/pic/port:channel command. The output of this command displays the diagnostic
optics information about the corresponding 10-Gigabit Ethernet port
of the PIC. For information about the P2-10G-40G-QSFPP PIC, see P2-10G-40G-QSFPP
PIC Overview.
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show interfaces diagnostics
optics command for DWDM and DWDM OTN PICs. Output fields are
listed in the approximate order in which they appear.
Field Name |
Field Description |
|---|---|
|
Name of the physical interface. |
|
Magnitude of the laser bias power setting current, in milliamperes (mA). The laser bias provides direct modulation of laser diodes and modulates currents. |
|
Laser output power, in milliwatts
(mW) and decibels, referenced to 1.0 mW (dBm). This is a software
equivalent to the |
|
Average received optical power,
in mW and dBm. This indicator is a software equivalent to the |
|
Laser end-of-life alarm: |
|
Laser wavelength alarm: |
|
Laser bias current alarm: |
|
Laser temperature alarm: |
|
Laser power alarm: |
|
Modulator temperature alarm: Transceivers from some vendors do not support this field. |
|
Modulator bias alarm: |
|
Transmit multiplexer first in,
first out (FIFO) error alarm: |
|
Transmit loss of phase-locked loop
(PLL) lock alarm: |
|
Receive loss of average optical
power alarm: |
|
Receive loss of AC power alarm: Transceivers from some vendors do not support this field. |
|
Receive loss of phase-locked loop
(PLL) lock alarm: |
Table 2 lists the output fields for the show interfaces diagnostics
optics command when the router is operating with bidirectional
SFP optics. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
|---|---|
|
Name of the physical interface. |
|
Magnitude of the laser bias power setting current, in milliamperes (mA). The laser bias provides direct modulation of laser diodes and modulates currents. |
|
Laser output power, in milliwatts (mW) and decibels, referenced to 1.0 mW (dBm). |
|
Temperature of the optics module, in Celsius and Fahrenheit. |
|
Internally measured module voltage. |
|
Average received optical power, in mW and dBm. |
|
Wavelength channel number set in the optics module. |
|
Wavelength set in the optics module. |
|
Transmit dither status. Displays whether transmit dither is enabled or disabled. |
|
Frequency error reported from optics module. |
|
Wavelength error reported from optics module. |
|
Laser bias power setting high alarm.
Displays |
|
Laser bias power setting low alarm.
Displays |
|
Laser bias power setting high warning.
Displays |
|
Laser bias power setting low warning.
Displays |
|
Laser output power high alarm.
Displays |
|
Laser output power low alarm. Displays |
|
Laser output power high warning.
Displays |
|
Laser output power low warning.
Displays |
|
Module temperature high alarm.
Displays |
|
Module temperature low alarm. Displays |
|
Module temperature high warning.
Displays |
|
Module temperature low warning.
Displays |
|
Module voltage high alarm. Displays |
|
Module voltage low alarm. Displays |
|
Module voltage high warning. Displays |
|
Module voltage high warning. Displays |
|
Receive laser power high alarm.
Displays |
|
Receive laser power low alarm.
Displays |
|
Receive laser power high warning.
Displays |
|
Receive laser power low warning.
Displays |
|
TEC fault alarm. Displays |
|
Wavelength unlocked alarm. Displays |
|
Optical transmit side status. Displays whether optical transmit side is not ready due to tuning. |
|
Vendor-specified threshold for
the laser bias current high alarm: |
|
Vendor-specified threshold for
the laser bias current low alarm: |
|
Vendor-specified threshold for
the laser bias current high warning: |
|
Vendor-specified threshold for
the laser bias current low warning: |
|
Vendor-specified threshold for
the laser output power high alarm: |
|
Vendor-specified threshold for
the laser output power low alarm: |
|
Vendor-specified threshold for
the laser output power high warning: |
|
Vendor-specified threshold for
the laser output power low warning: |
|
Vendor-specified threshold for
the module temperature high alarm: |
|
Vendor-specified threshold for
the module temperature low alarm: |
|
Vendor-specified threshold for
the module temperature high warning: |
|
Vendor-specified threshold for
the module temperature low warning: |
|
Module voltage high alarm threshold: |
|
Module voltage low alarm threshold: |
|
Module voltage high warning threshold: |
|
Module voltage low warning threshold: |
|
Vendor-specified threshold for
the laser Rx power high alarm: |
|
Vendor-specified threshold for
the laser Rx power low alarm: |
|
Vendor-specified threshold for
the laser Rx power high warning: |
|
Vendor-specified threshold for
the laser Rx power low warning: |
Table 3 lists the output fields for the show interfaces diagnostics
optics command for SFP transceivers. Output fields are listed
in the approximate order in which they appear.
Field Name |
Field Description |
|---|---|
|
Name of the physical interface. |
|
Measured laser bias current in uA. |
|
Measured laser output power in mW. |
|
Internally measured module temperature. |
|
Internally measured module voltage. |
|
Measured receive optical power in mW. |
|
Laser bias current high alarm: |
|
Laser bias current low alarm: |
|
Laser output power high alarm: |
|
Laser output power low alarm: |
|
Module temperature high alarm: |
|
Module temperature low alarm: |
|
Laser receive power high alarm: |
|
Laser receive power low alarm: |
|
Laser bias current high warning: |
|
Laser bias current low warning: |
|
Laser output power high warning: |
|
Laser output power low warning: |
|
Module temperature high warning: |
|
Module temperature low warning: |
|
Laser receive power high warning: |
|
Laser receive power low warning: |
|
Laser bias current high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser bias current low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser bias current high warning threshold. Warning ranges are vendor-specific. |
|
Laser bias current low warning threshold. Warning ranges are vendor-specific. |
|
Laser output power high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser output power low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser output power high warning threshold. Warning ranges are vendor-specific. |
|
Laser output power low warning threshold. Warning ranges are vendor-specific. |
|
Module temperature high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Module temperature low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Module temperature high warning threshold. Warning ranges are vendor-specific. |
|
Module temperature low warning threshold. Warning ranges are vendor-specific. |
|
Module voltage high alarm threshold. Alarm ranges are vendor-specific. |
|
Module voltage low alarm threshold. Alarm ranges are vendor-specific. |
|
Module voltage high warning threshold. Warning ranges are vendor-specific. |
|
Module voltage low warning threshold. Warning ranges are vendor-specific. |
|
Laser receive power high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser receive power low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser receive power high warning threshold. Warning threshold ranges are vendor-specific. |
|
Laser receive power high warning threshold. Warning threshold ranges are vendor-specific. |
Table 4 lists the output fields for the show interfaces diagnostics
optics command for 10-Gigabit Ethernet transceivers. Output
fields are listed in the approximate order in which they appear.
Field Name |
Field Description |
|---|---|
|
Name of the physical interface. |
|
Measured laser bias current in mA. |
|
Measured laser output power in mW. |
|
Internally measured module temperature. |
|
Measured receive optical power in mW. |
|
Laser bias current high alarm: |
|
Laser bias current low alarm: |
|
Laser output power high alarm: |
|
Laser output power low alarm: |
|
Module temperature high alarm: |
|
Module temperature low alarm: |
|
Laser receive power high alarm: |
|
Laser receive power low alarm: |
|
Laser bias current high warning: |
|
Laser bias current low warning: |
|
Laser output power high warning: |
|
Laser output power low warning: |
|
Module temperature high warning: |
|
Module temperature low warning: |
|
Laser receive power high warning: |
|
Laser receive power low warning: |
|
Laser bias current high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser bias current low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser output power high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser output power low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Module temperature high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Module temperature low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser receive power high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser receive power low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser bias current high warning threshold. Warning ranges are vendor-specific. |
|
Laser bias current low warning threshold. Warning ranges are vendor-specific. |
|
Laser output power high warning threshold. Warning ranges are vendor-specific. |
|
Laser output power low warning threshold. Warning ranges are vendor-specific. |
|
Module temperature high warning threshold. Warning ranges are vendor-specific. |
|
Module temperature low warning threshold. Warning ranges are vendor-specific. |
|
Laser receive power high warning threshold. Warning threshold ranges are vendor-specific. |
|
Laser receive power low warning threshold. Warning threshold ranges are vendor-specific. |
Table 5 lists the output fields for the show interfaces diagnostics
optics command for 100-Gigabit Ethernet transceivers. Output
fields are listed in the approximate order in which they appear.
Field Name |
Field Description |
|---|---|
|
Name of the physical interface. |
Grid Channel Number |
Set of wavelengths are divided into 40 grids. At a time transceiver will be programmed in one of this set (grid). Mapping of center wavelength to grid number is presented by this parameter. |
Corrected Error Ratio |
Indicates accumulated Bit Error Ratio. |
Uncorrected Words Ratio |
Monitors the error rate for either the full 100G link or on a channel-by-channel basis. Indicates the frame errors. |
|
Measured laser bias current in mA. |
|
Measured laser output power in mW. |
|
Internally measured module temperature. |
|
Measured receive optical power in mW. |
|
Laser bias current high alarm: |
|
Laser bias current low alarm: |
|
Laser output power high alarm: |
|
Laser output power low alarm: |
|
Module temperature high alarm: |
|
Module temperature low alarm: |
|
Laser receive power high alarm: |
|
Laser receive power low alarm: |
|
Laser bias current high warning: |
|
Laser bias current low warning: |
|
Laser output power high warning: |
|
Laser output power low warning: |
|
Module temperature high warning: |
|
Module temperature low warning: |
|
Laser receive power high warning: |
|
Laser receive power low warning: |
|
Laser bias current high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser bias current low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser output power high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser output power low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Module temperature high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Module temperature low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser receive power high alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser receive power low alarm threshold. Alarm threshold ranges are vendor-specific. |
|
Laser bias current high warning threshold. Warning ranges are vendor-specific. |
|
Laser bias current low warning threshold. Warning ranges are vendor-specific. |
|
Laser output power high warning threshold. Warning ranges are vendor-specific. |
|
Laser output power low warning threshold. Warning ranges are vendor-specific. |
|
Module temperature high warning threshold. Warning ranges are vendor-specific. |
|
Module temperature low warning threshold. Warning ranges are vendor-specific. |
|
Laser receive power high warning threshold. Warning threshold ranges are vendor-specific. |
|
Laser receive power low warning threshold. Warning threshold ranges are vendor-specific. |
Lane carrier frequency offset |
Difference (in frequency units) between the target frequency and the actual frequency. |
Lane SNR |
Signal-to-noise ratio of the electrical data present on the channel. |
TEC Current |
Monitors the amount of current flowing to the TEC of a cooled laser. It is a 16-bit signed 2s complement value with a LSB unit of 0.1 mA. Thus the total range is from -3.2768 A to +3.2767 A. |
Residual ISI |
Measures the amount of correction being done by the module to account for residual inter- symbol interference (ISI). The usual cause for this is optical dispersion so this measurement is a proxy for residual (uncorrected) optical dispersion that is being corrected by the module. The parameter is unitless and the threshold alarm and warning values will give an indication of the severity of the uncorrected dispersion. |
PAM Histogram |
Provides the rate of measured signal on the line that has an analog level near the cutoff for a PAM bit transition (for example, 0 <-> 1, 1<->2, 2<->3). |
Table 6 lists the output fields for the show interfaces diagnostics
optics command for XFP transceivers. Output fields are listed
in the approximate order in which they appear.
Field Name |
Field Description |
|---|---|
|
Name of the physical interface. |
|
Magnitude of the laser bias power setting current, in milliamperes (mA). The laser bias provides direct modulation of laser diodes and modulates currents. |
|
Laser output power, in milliwatts
(mW) and decibels, referenced to 1.0 mW (dBm). This is a software
equivalent to the |
|
Temperature of the XFP optics module, in Celsius and Fahrenheit. |
|
Laser received optical power, in mW and dBm. |
|
Laser bias power setting high alarm.
Displays |
|
Laser bias power setting low alarm.
Displays |
|
Laser bias power setting high warning.
Displays |
|
Laser bias power setting low warning.
Displays |
|
Laser output power high alarm.
Displays |
|
Laser output power low alarm. Displays |
|
Laser output power high warning.
Displays |
|
Laser output power low warning.
Displays |
|
Module temperature high alarm.
Displays |
|
Module temperature low alarm. Displays |
|
Module temperature high warning.
Displays |
|
Module temperature low warning.
Displays |
|
Receive laser power high alarm.
Displays |
|
Receive laser power low alarm.
Displays |
|
Receive laser power high warning.
Displays |
|
Receive laser power low warning.
Displays |
|
Module not ready alarm. When |
|
Module power down alarm. When |
|
Any condition leading to invalid
data on the transmit path. Displays |
|
Any condition leading to invalid
data on the transmit path. Displays |
|
Laser fault condition. Displays |
|
Transmit clock and data recovery
(CDR) loss of lock. Loss of lock on the transmit side of the CDR.
Displays |
|
Any condition leading to invalid
data on the receive path. Displays |
|
Receive Loss of Signal alarm. When |
|
Receive CDR loss of lock. Loss
of lock on the receive side of the CDR. Displays |
|
Vendor-specified threshold for
the laser bias current high alarm: |
|
Vendor-specified threshold for
the laser bias current low alarm: |
|
Vendor-specified threshold for
the laser bias current high warning: |
|
Vendor-specified threshold for
the laser bias current low warning: |
|
Vendor-specified threshold for
the laser output power high alarm: |
|
Vendor-specified threshold for
the laser output power low alarm: |
|
Vendor-specified threshold for
the laser output power high warning: |
|
Vendor-specified threshold for
the laser output power low warning: |
|
Vendor-specified threshold for
the module temperature high alarm: |
|
Vendor-specified threshold for
the module temperature low alarm: |
|
Vendor-specified threshold for
the module temperature high warning: |
|
Vendor-specified threshold for
the module temperature low warning: |
|
Vendor-specified threshold for
the laser Rx power high alarm: |
|
Vendor-specified threshold for
the laser Rx power low alarm: |
|
Vendor-specified threshold for
the laser Rx power high warning: |
|
Vendor-specified threshold for
the laser Rx power low warning: |
Table 7 lists the output fields for the show interfaces diagnostics
optics command for VCP. Output fields are listed in the approximate
order in which they appear.
Field Name |
Field Description |
|---|---|
|
Name of the physical interface. |
|
Magnitude of the laser bias power setting current, in milliamperes (mA). The laser bias provides direct modulation of laser diodes and modulates currents. |
|
Laser output power, in milliwatts (mW) and decibels, referenced to 1.0 mW (dBm). |
|
Temperature of the optics module, in Celsius and Fahrenheit. |
|
Internally measured module voltage. |
|
Average received optical power, in mW and dBm. |
|
Laser bias power setting high alarm. Displays |
|
Laser bias power setting low alarm. Displays |
|
Laser bias power setting high warning. Displays |
|
Laser bias power setting low warning. Displays |
|
Laser output power high alarm. Displays |
|
Laser output power low alarm. Displays |
|
Laser output power high warning. Displays |
|
Laser output power low warning. Displays |
|
Module temperature high alarm. Displays |
|
Module temperature low alarm. Displays |
|
Module temperature high warning. Displays |
|
Module temperature low warning. Displays |
|
Module voltage high alarm. Displays |
|
Module voltage low alarm. Displays |
|
Module voltage high warning. Displays |
|
Module voltage high warning. Displays |
|
Receive laser power high alarm. Displays |
|
Receive laser power low alarm. Displays |
|
Receive laser power high warning. Displays |
|
Receive laser power low warning. Displays |
|
Vendor-specified threshold for the laser bias current high alarm. |
|
Vendor-specified threshold for the laser bias current low alarm. |
|
Vendor-specified threshold for the laser bias current high warning. |
|
Vendor-specified threshold for the laser bias current low warning. |
|
Vendor-specified threshold for the laser output power high alarm. |
|
Vendor-specified threshold for the laser output power low alarm. |
|
Vendor-specified threshold for the laser output power high warning. |
|
Vendor-specified threshold for the laser output power low warning. |
|
Vendor-specified threshold for the module temperature high alarm. |
|
Vendor-specified threshold for the module temperature low alarm. |
|
Vendor-specified threshold for the module temperature high warning. |
|
Vendor-specified threshold for the module temperature low warning. |
|
Module voltage high alarm threshold. |
|
Module voltage low alarm threshold. |
|
Module voltage high warning threshold. |
|
Module voltage low warning threshold. |
|
Vendor-specified threshold for the laser Rx power high alarm. |
|
Vendor-specified threshold for the laser Rx power low alarm. |
|
Vendor-specified threshold for the laser Rx power high warning. |
|
Vendor-specified threshold for the laser Rx power low warning. |
Sample Output
- show interfaces diagnostics optics for 10-Gigabit Ethernet on JNP10K-LC1201 line card (PTX10008)
- show interfaces diagnostics optics (DWDM and DWDM OTN)
- show interfaces diagnostics optics (MPC6E with OTN MIC)
- show interfaces diagnostics optics (Bidirectional SFP)
- show interfaces diagnostics optics (SFP)
- show interfaces diagnostics optics (SFP)
- show interfaces diagnostics optics (XFP and CFP Optics)
- show interfaces diagnostics optics for 10-Gigabit Ethernet (PTX 24-10GE-SFPP)
- show interfaces diagnostics optics for 40-Gigabit Ethernet
- show interfaces diagnostics optics (P1-PTX-2-100G-WDM)
- show interfaces diagnostics optics (P1-PTX-24-10G-W-SFPP )
- show interfaces diagnostics optics (P2-10G-40G-QSFPP PIC in 40-Gigabit Ethernet mode)
- show interfaces diagnostics optics (P2-10G-40G-QSFPP PIC in 10-Gigabit Ethernet mode)
- show interfaces diagnostics optics (MX960 Router with MPC3E and 100-Gigabit DWDM OTN MIC)
- show interfaces diagnostics optics (MX960 Router with MPC10E-10C-MRATE, MPC10E-15C-MRATE line cards)
- show interfaces diagnostics optics (PTX3000 Router with 5-port 100-Gigabit DWDM OTN PIC
- show interfaces diagnostics optics (for VCP)
- show interfaces diagnostics optics (MPC7 with interfaces disabled)
- show interfaces diagnostics optics for 100-Gigabit Ethernet (QSFP-100GE-DWDM2)
- show interfaces diagnostics optics (PTX10001-36MR) (400G ZR optics)
- show interfaces diagnostics optics (PTX10001-36MR) (400G ZR-M optics)
- show interfaces diagnostics optics (PTX10001-36MR, PTX10002-36QDD, PTX10004, PTX10008, and PTX10016) (400ZR and 400G OpenZR+ optics)
show interfaces diagnostics optics for 10-Gigabit Ethernet on JNP10K-LC1201 line card (PTX10008)
user@host> show interfaces diagnostics optics et-4/0/20
Physical interface: et-4/0/20
Module temperature : 34 degrees C / 93 degrees F
Module voltage : 3.315 V
Wavelength channel number : 42
Wavelength setpoint : 1550.10 nm
Tx dither : Enabled
Frequency error : 0.20 GHz
Wavelength error : 0 nm
TEC fault alarm : False
Wavelength unlocked alarm : False
Tx tune alarm : False
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Cont...............................................show interfaces diagnostics optics (DWDM and DWDM OTN)
user@host> show interfaces diagnostics optics ge-5/0/0 Physical interface: ge-5/0/0 Laser bias current : 79.938 mA Laser output power : 1.592 mW / 2.02 dBm Receiver signal average optical power : 1.3854 mW / 1.42 dBm Laser end-of-life alarm : Off Laser wavelength alarm : Off Laser bias current alarm : Off Laser temperature alarm : Off Laser power alarm : Off Modulator temperature alarm : Off Modulator bias alarm : Off Tx multiplexer FIFO error alarm : Off Tx loss of PLL lock alarm : Off Rx loss of average optical power alarm: Off Rx loss of AC power alarm : Off Rx loss of PLL lock alarm : Off
show interfaces diagnostics optics (MPC6E with OTN MIC)
user@host> show interfaces diagnostics optics xe-3/0/0
Physical interface: xe-3/0/0
Laser bias current : 7.806 mA
Laser output power : 0.5660 mW / -2.47 dBm
Module temperature : 32 degrees C / 89 degrees F
Module voltage : 3.3560 V
Receiver signal average optical power : 0.5501 mW / -2.60 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 11.800 mA
Laser bias current low alarm threshold : 4.000 mA
Laser bias current high warning threshold : 10.800 mA
Laser bias current low warning threshold : 5.000 mA
Laser output power high alarm threshold : 0.8310 mW / -0.80 dBm
Laser output power low alarm threshold : 0.2510 mW / -6.00 dBm
Laser output power high warning threshold : 0.6600 mW / -1.80 dBm
Laser output power low warning threshold : 0.3160 mW / -5.00 dBm
Module temperature high alarm threshold : 78 degrees C / 172 degrees F
Module temperature low alarm threshold : -13 degrees C / 9 degrees F
Module temperature high warning threshold : 73 degrees C / 163 degrees F
Module temperature low warning threshold : -8 degrees C / 18 degrees F
Module voltage high alarm threshold : 3.700 V
Module voltage low alarm threshold : 2.900 V
Module voltage high warning threshold : 3.600 V
Module voltage low warning threshold : 3.000 V
Laser rx power high alarm threshold : 1.0000 mW / 0.00 dBm
Laser rx power low alarm threshold : 0.0100 mW / -20.00 dBm
Laser rx power high warning threshold : 0.7943 mW / -1.00 dBm
Laser rx power low warning threshold : 0.0158 mW / -18.01 dBm
show interfaces diagnostics optics (Bidirectional SFP)
user@host> show interfaces diagnostics optics ge-3/0/6
Physical interface: ge-3/0/6
Laser bias current : 13.356 mA
Laser output power : 0.2210 mW / -6.56 dBm
Module temperature : 36 degrees C / 96 degrees F
Module voltage : 3.2180 V
Receiver signal average optical power : 0.2429 mW / -6.15 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 70.000 mA
Laser bias current low alarm threshold : 0.002 mA
Laser bias current high warning threshold : 65.000 mA
Laser bias current low warning threshold : 0.002 mA
Laser output power high alarm threshold : 1.0000 mW / 0.00 dBm
Laser output power low alarm threshold : 0.0560 mW / -12.52 dBm
Laser output power high warning threshold : 0.6300 mW / -2.01 dBm
Laser output power low warning threshold : 0.0890 mW / -10.51 dBm
Module temperature high alarm threshold : 100 degrees C / 212 degrees F
Module temperature low alarm threshold : -50 degrees C / -58 degrees F
Module temperature high warning threshold : 95 degrees C / 203 degrees F
Module temperature low warning threshold : -48 degrees C / -54 degrees F
Module voltage high alarm threshold : 3.700 V
Module voltage low alarm threshold : 2.900 V
Module voltage high warning threshold : 3.600 V
Module voltage low warning threshold : 3.000 V
Laser rx power high alarm threshold : 1.9953 mW / 3.00 dBm
Laser rx power low alarm threshold : 0.0001 mW / -40.00 dBm
Laser rx power high warning threshold : 1.0000 mW / 0.00 dBm
Laser rx power low warning threshold : 0.0010 mW / -30.00 dBmshow interfaces diagnostics optics (SFP)
user@host> show interfaces diagnostics optics ge-0/3/0
Physical interface: ge-0/3/0
Laser bias current : 23.408 mA
Laser output power : 1.479 mW / 1.70 dBm
Module temperature : 37 degrees C / 99 degrees F
Laser rx power : 0.121 mW / -9.16 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high warning : Off
Module temperature low warning : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 31.000 mA
Laser bias current low alarm threshold : 10.000 mA
Laser output power high alarm threshold : 6.000 mW / 7.78 dBm
Laser output power low alarm threshold : 0.100 mW / -10.00 dBm
Module temperature high alarm threshold : 85 degrees C / 185 degrees F
Module temperature low alarm threshold : 0 degrees C / 32 degrees F
Laser rx power high alarm threshold : 1.000 mW / 0.00 dBm
Laser rx power low alarm threshold : 0.001 mW / -30.00 dBm
Laser bias current high warning threshold : 28.000 mA
Laser bias current low warning threshold : 11.000 mA
Laser output power high warning threshold : 5.000 mW / 6.99 dBm
Laser output power low warning threshold : 0.500 mW / -3.01 dBm
Module temperature high warning threshold : 70 degrees C / 158 degrees F
Module temperature low warning threshold : 10 degrees C / 50 degrees F
Laser rx power high warning threshold : 0.501 mW / -3.00 dBm
Laser rx power low warning threshold : 0.001 mW / -28.86 dBm
show interfaces diagnostics optics (SFP)
user@host> show interfaces diagnostics optics ge-1/0/0
Physical interface: ge-1/0/0
Laser bias current : 49.010 mA
Laser output power : 1.263 mW / 1.01 dBm
Module temperature : 17 degrees C / 62 degrees F
Module voltage : 4.21 V
Laser rx power : 0.060 mW / -12.21 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 70.000 mA
Laser bias current low alarm threshold : 20.000 mA
Laser bias current high warning threshold : 65.000 mA
Laser bias current low warning threshold : 25.000 mA
Laser output power high alarm threshold : 1.4120 mW / 1.50 dBm
Laser output power low alarm threshold : 0.1990 mW / -7.01 dBm
Laser output power high warning threshold : 1.2580 mW / 1.00 dBm
Laser output power low warning threshold : 0.2230 mW / -6.52 dBm
Module temperature high alarm threshold : 78 degrees C /172 degrees F
Module temperature low alarm threshold : 13 degrees C / 9 degrees F
Module temperature high warning threshold : 75 degrees C /167 degrees F
Module temperature low warning threshold : 10 degrees C / 14 degrees F
Module voltage high alarm threshold : 5.71 V
Module voltage low alarm threshold : 2.05 V
Module voltage high warning threshold : 5.20 V
Module voltage low warning threshold : 3.11 V
Laser rx power high alarm threshold : 1.7783 mW / 2.50 dBm
Laser rx power low alarm threshold : 0.0100 mW / -20.00 dBm
Laser rx power high warning threshold : 1.5849 mW / 2.00 dBm
Laser rx power low warning threshold : 0.0158 mW / -18.01 dBm
show interfaces diagnostics optics (XFP and CFP Optics)
user@host> show interfaces diagnostics optics xe-2/1/0
Physical interface: xe-2/1/0
Laser bias current : 52.060 mA
Laser output power : 0.5640 mW / -2.49 dBm
Module temperature : 31 degrees C / 88 degrees F
Laser rx power : 0.0844 mW / -10.74 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Module not ready alarm : Off
Module power down alarm : Off
Tx data not ready alarm : Off
Tx not ready alarm : Off
Tx laser fault alarm : Off
Tx CDR loss of lock alarm : Off
Rx not ready alarm : Off
Rx loss of signal alarm : Off
Rx CDR loss of lock alarm : Off
Laser bias current high alarm threshold : 130.000 mA
Laser bias current low alarm threshold : 10.000 mA
Laser bias current high warning threshold : 120.000 mA
Laser bias current low warning threshold : 12.000 mA
Laser output power high alarm threshold : 0.8910 mW / -0.50 dBm
Laser output power low alarm threshold : 0.2230 mW / -6.52 dBm
Laser output power high warning threshold : 0.7940 mW / -1.00 dBm
Laser output power low warning threshold : 0.2510 mW / -6.00 dBm
Module temperature high alarm threshold : 90 degrees C / 194 degrees F
Module temperature low alarm threshold : -5 degrees C / 23 degrees F
Module temperature high warning threshold : 85 degrees C / 185 degrees F
Module temperature low warning threshold : 0 degrees C / 32 degrees F
Laser rx power high alarm threshold : 1.2589 mW / 1.00 dBm
Laser rx power low alarm threshold : 0.0323 mW / -14.91 dBm
Laser rx power high warning threshold : 1.1220 mW / 0.50 dBm
Laser rx power low warning threshold : 0.0363 mW / -14.40 dBm
show interfaces diagnostics optics for 10-Gigabit Ethernet (PTX 24-10GE-SFPP)
user@host> show interfaces diagnostics optics et-2/0/23
Physical interface: et-2/0/23
Laser bias current : 8.482 mA
Laser output power : 0.5890 mW / -2.30 dBm
Module temperature : 51 degrees C / 123 degrees F
Module voltage : 3.2970 V
Receiver signal average optical power : 0.5574 mW / -2.54 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 11.800 mA
Laser bias current low alarm threshold : 4.000 mA
Laser bias current high warning threshold : 10.800 mA
Laser bias current low warning threshold : 5.000 mA
Laser output power high alarm threshold : 0.8310 mW / -0.80 dBm
Laser output power low alarm threshold : 0.2510 mW / -6.00 dBm
Laser output power high warning threshold : 0.6600 mW / -1.80 dBm
Laser output power low warning threshold : 0.3160 mW / -5.00 dBm
Module temperature high alarm threshold : 93 degrees C / 199 degrees F
Module temperature low alarm threshold : -13 degrees C / 9 degrees F
Module temperature high warning threshold : 88 degrees C / 190 degrees F
Module temperature low warning threshold : -8 degrees C / 18 degrees F
Module voltage high alarm threshold : 3.700 V
Module voltage low alarm threshold : 2.900 V
Module voltage high warning threshold : 3.600 V
Module voltage low warning threshold : 3.000 V
Laser rx power high alarm threshold : 1.0000 mW / 0.00 dBm
Laser rx power low alarm threshold : 0.0100 mW / -20.00 dBm
Laser rx power high warning threshold : 0.7943 mW / -1.00 dBm
Laser rx power low warning threshold : 0.0158 mW / -18.01 dBm
show interfaces diagnostics optics for 40-Gigabit Ethernet
user@host> show interfaces diagnostics optics et-7/1/0
Physical interface: et-7/1/0
Module temperature : 34 degrees C / 94 degrees F
Module voltage : 3.4720 V
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module not ready alarm : Off
Module low power alarm : Off
Module initialization incomplete alarm : Off
Module fault alarm : Off
PLD Flash initialization fault alarm : Off
Power supply fault alarm : Off
Checksum fault alarm : Off
Tx laser disabled alarm : Off
Tx loss of signal functionality alarm : Off
Tx CDR loss of lock alarm : Off
Rx loss of signal alarm : Off
Rx CDR loss of lock alarm : Off
Module temperature high alarm threshold : 80 degrees C / 176 degrees F
Module temperature low alarm threshold : -10 degrees C / 14 degrees F
Module temperature high warning threshold : 75 degrees C / 167 degrees F
Module temperature low warning threshold : -5 degrees C / 23 degrees F
Module voltage high alarm threshold : 3.5990 V
Module voltage low alarm threshold : 3.0000 V
Module voltage high warning threshold : 3.5000 V
Module voltage low warning threshold : 3.0990 V
Laser bias current high alarm threshold : 100.000 mA
Laser bias current low alarm threshold : 10.000 mA
Laser bias current high warning threshold : 80.000 mA
Laser bias current low warning threshold : 15.000 mA
Laser output power high alarm threshold : 2.8180 mW / 4.50 dBm
Laser output power low alarm threshold : 0.2390 mW / -6.22 dBm
Laser output power high warning threshold : 2.2380 mW / 3.50 dBm
Laser output power low warning threshold : 0.3010 mW / -5.21 dBm
Laser rx power high alarm threshold : 2.5119 mW / 4.00 dBm
Laser rx power low alarm threshold : 0.0316 mW / -15.00 dBm
Laser rx power high warning threshold : 1.9953 mW / 3.00 dBm
Laser rx power low warning threshold : 0.0631 mW / -12.00 dBm
Laser temperature high alarm threshold : 80 degrees C / 176 degrees F
Laser temperature low alarm threshold : -10 degrees C / 14 degrees F
Laser temperature high warning threshold : 75 degrees C / 167 degrees F
Laser temperature low warning threshold : -5 degrees C / 23 degrees F
Lane 0
Laser bias current : 27.829 mA
Laser output power : 0.851 mW / -0.70 dBm
Laser temperature : 34 degrees C / 94 degrees F
Laser receiver power : 0.894 mW / -0.49 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Laser temperature high alarm : Off
Laser temperature low alarm : Off
Laser temperature high warning : Off
Laser temperature low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Tx CDR loss of lock alarm : Off
Rx loss of signal alarm : Off
Rx CDR loss of lock alarm : Off
APD supply fault alarm : Off
TEC fault alarm : Off
Wavelength unlocked alarm : Off
Lane 1
Laser bias current : 35.374 mA
Laser output power : 0.896 mW / -0.48 dBm
Laser temperature : 34 degrees C / 94 degrees F
Laser receiver power : 0.707 mW / -1.50 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Laser temperature high alarm : Off
Laser temperature low alarm : Off
Laser temperature high warning : Off
Laser temperature low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Tx CDR loss of lock alarm : Off
Rx loss of signal alarm : Off
Rx CDR loss of lock alarm : Off
APD supply fault alarm : Off
TEC fault alarm : Off
Wavelength unlocked alarm : Off
Lane 2
Laser bias current : 29.173 mA
Laser output power : 0.890 mW / -0.51 dBm
Laser temperature : 34 degrees C / 94 degrees F
Laser receiver power : 0.704 mW / -1.52 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Laser temperature high alarm : Off
Laser temperature low alarm : Off
Laser temperature high warning : Off
Laser temperature low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Tx CDR loss of lock alarm : Off
Rx loss of signal alarm : Off
Rx CDR loss of lock alarm : Off
APD supply fault alarm : Off
TEC fault alarm : Off
Wavelength unlocked alarm : Off
Lane 3
Laser bias current : 36.164 mA
Laser output power : 0.899 mW / -0.46 dBm
Laser temperature : 34 degrees C / 94 degrees F
Laser receiver power : 0.892 mW / -0.50 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Laser temperature high alarm : Off
Laser temperature low alarm : Off
Laser temperature high warning : Off
Laser temperature low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Tx CDR loss of lock alarm : Off
Rx loss of signal alarm : Off
Rx CDR loss of lock alarm : Off
APD supply fault alarm : Off
TEC fault alarm : Off
Wavelength unlocked alarm : Offshow interfaces diagnostics optics (P1-PTX-2-100G-WDM)
user@host> show interfaces diagnostics optics et-1/0/0
Physical interface: et-1/0/0
Module temperature : 37 degrees C / 98 degrees F
Module voltage : 3.3370 V
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module not ready alarm : Off
Module low power alarm : Off
Module initialization incomplete alarm : Off
Module fault alarm : Off
PLD Flash initialization fault alarm : Off
Power supply fault alarm : Off
Checksum fault alarm : Off
Tx laser disabled alarm : Off
Tx loss of signal functionality alarm : Off
Tx CDR loss of lock alarm : Off
Rx loss of signal alarm : Off
Rx CDR loss of lock alarm : Off
Module temperature high alarm threshold : 70 degrees C / 158 degrees F
Module temperature low alarm threshold : 0 degrees C / 32 degrees F
Module temperature high warning threshold : 68 degrees C / 154 degrees F
Module temperature low warning threshold : 2 degrees C / 36 degrees F
Module voltage high alarm threshold : 3.4640 V
Module voltage low alarm threshold : 3.1340 V
Module voltage high warning threshold : 3.4310 V
Module voltage low warning threshold : 3.1670 V
Laser bias current high alarm threshold : 300.000 mA
Laser bias current low alarm threshold : 75.000 mA
Laser bias current high warning threshold : 287.500 mA
Laser bias current low warning threshold : 87.500 mA
Rx power high alarm threshold : 2.8184 mW / 4.50 dBm
Rx power low alarm threshold : 0.0251 mW / -16.00 dBm
Rx power high warning threshold : 2.5119 mW / 4.00 dBm
Rx power low warning threshold : 0.0501 mW / -13.00 dBm
LOS alarm threshold : 0.0158mW/ -18.01 dBm
LOS warning threshold : 0.0251mW/ -16.00 DBm
Laser temperature high alarm threshold : 57 degrees C / 135 degrees F
Laser temperature low alarm threshold : 25 degrees C / 77 degrees F
Laser temperature high warning threshold : 55 degrees C / 131 degrees F
Laser temperature low warning threshold : 27 degrees C / 81 degrees F
Lane 0
Laser bias current : 164.384 mA
Tx power : 1.181 mW / 0.72 dBm
Laser temperature : 41 degrees C / 106 degrees F
Rx power : 0.632 mW / -1.99 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Tx power high alarm : Off
Tx power low alarm : Off
Tx power high warning : Off
Tx power low warning : Off
Laser temperature high alarm : Off
Laser temperature low alarm : Off
Laser temperature high warning : Off
Laser temperature low warning : Off
Rx power high alarm : Off
Rx power low alarm : Off
Rx power high warning : Off
Rx power low warning : Off
Tx loss of signal functionality alarm : Off
Tx CDR loss of lock alarm : Off
Rx loss of signal alarm : Off
Rx CDR loss of lock alarm : Off
APD supply fault alarm : Off
TEC fault alarm : Off
Wavelength unlocked alarm : Off
show interfaces diagnostics optics (P1-PTX-24-10G-W-SFPP )
user@host> show interfaces diagnostics optics ge-3/0/6
Physical interface: ge-3/0/6
Laser bias current : 13.356 mA
Laser output power : 0.2210 mW / -6.56 dBm
Module temperature : 36 degrees C / 96 degrees F
Module voltage : 3.2180 V
Receiver signal average optical power : 0.2429 mW / -6.15 dBm
Wavelength Channel number : 1
Wavelength setpoint : 1568.80 nm
Tx Dither : Disabled
Frequency Error : 0.00 GHz
Wavelength Error : 0.00 nm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
TEC fault alarm : Off
Wavelength unlocked alarm : Off
Tx Tune : Off
Laser bias current high alarm threshold : 70.000 mA
Laser bias current low alarm threshold : 0.002 mA
Laser bias current high warning threshold : 65.000 mA
Laser bias current low warning threshold : 0.002 mA
Laser output power high alarm threshold : 1.0000 mW / 0.00 dBm
Laser output power low alarm threshold : 0.0560 mW / -12.52 dBm
Laser output power high warning threshold : 0.6300 mW / -2.01 dBm
Laser output power low warning threshold : 0.0890 mW / -10.51 dBm
Module temperature high alarm threshold : 100 degrees C / 212 degrees F
Module temperature low alarm threshold : -50 degrees C / -58 degrees F
Module temperature high warning threshold : 95 degrees C / 203 degrees F
Module temperature low warning threshold : -48 degrees C / -54 degrees F
Module voltage high alarm threshold : 3.700 V
Module voltage low alarm threshold : 2.900 V
Module voltage high warning threshold : 3.600 V
Module voltage low warning threshold : 3.000 V
Laser rx power high alarm threshold : 1.9953 mW / 3.00 dBm
Laser rx power low alarm threshold : 0.0001 mW / -40.00 dBm
Laser rx power high warning threshold : 1.0000 mW / 0.00 dBm
Laser rx power low warning threshold : 0.0010 mW / -30.00 dBmshow interfaces diagnostics optics (P2-10G-40G-QSFPP PIC in 40-Gigabit Ethernet mode)
user@host> show interfaces diagnostics optics et-0/1/5
Physical interface: et-0/1/5
Module temperature : 30 degrees C / 85 degrees F
Module voltage : 3.2760 V
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module temperature high alarm threshold : 75 degrees C / 167 degrees F
Module temperature low alarm threshold : 5 degrees C / 41 degrees F
Module temperature high warning threshold : 70 degrees C / 158 degrees F
Module temperature low warning threshold : 0 degrees C / 32 degrees F
Module voltage high alarm threshold : 3.6300 V
Module voltage low alarm threshold : 2.9700 V
Module voltage high warning threshold : 3.4640 V
Module voltage low warning threshold : 3.1340 V
Laser bias current high alarm threshold : 10.000 mA
Laser bias current low alarm threshold : 0.500 mA
Laser bias current high warning threshold : 9.500 mA
Laser bias current low warning threshold : 1.000 mA
Laser output power high alarm threshold : 0.0000 mW / - Inf dBm
Laser output power low alarm threshold : 0.0000 mW / - Inf dBm
Laser output power high warning threshold : 0.0000 mW / - Inf dBm
Laser output power low warning threshold : 0.0000 mW / - Inf dBm
Laser rx power high alarm threshold : 2.1878 mW / 3.40 dBm
Laser rx power low alarm threshold : 0.0446 mW / -13.51 dBm
Laser rx power high warning threshold : 1.7378 mW / 2.40 dBm
Laser rx power low warning threshold : 0.1122 mW / -9.50 dBm
Lane 0
Laser bias current : 7.065 mA
Laser output power : 0.710 mW / -1.49 dBm
Laser receiver power : 0.472 mW / -3.26 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Lane 1
Laser bias current : 6.978 mA
Laser output power : 0.771 mW / -1.13 dBm
Laser receiver power : 0.450 mW / -3.47 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Lane 2
Laser bias current : 6.955 mA
Laser output power : 0.760 mW / -1.19 dBm
Laser receiver power : 0.556 mW / -2.55 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Lane 3
Laser bias current : 6.981 mA
Laser output power : 0.736 mW / -1.33 dBm
Laser receiver power : 0.537 mW / -2.70 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
show interfaces diagnostics optics (P2-10G-40G-QSFPP PIC in 10-Gigabit Ethernet mode)
user@host> show interfaces diagnostics optics et-0/1/5:3
Physical interface: et-0/1/5:3
Module temperature : 30 degrees C / 85 degrees F
Module voltage : 3.2760 V
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module temperature high alarm threshold : 75 degrees C / 167 degrees F
Module temperature low alarm threshold : 5 degrees C / 41 degrees F
Module temperature high warning threshold : 70 degrees C / 158 degrees F
Module temperature low warning threshold : 0 degrees C / 32 degrees F
Module voltage high alarm threshold : 3.6300 V
Module voltage low alarm threshold : 2.9700 V
Module voltage high warning threshold : 3.4640 V
Module voltage low warning threshold : 3.1340 V
Laser bias current high alarm threshold : 10.000 mA
Laser bias current low alarm threshold : 0.500 mA
Laser bias current high warning threshold : 9.500 mA
Laser bias current low warning threshold : 1.000 mA
Laser output power high alarm threshold : 0.0000 mW / - Inf dBm
Laser output power low alarm threshold : 0.0000 mW / - Inf dBm
Laser output power high warning threshold : 0.0000 mW / - Inf dBm
Laser output power low warning threshold : 0.0000 mW / - Inf dBm
Laser rx power high alarm threshold : 2.1878 mW / 3.40 dBm
Laser rx power low alarm threshold : 0.0446 mW / -13.51 dBm
Laser rx power high warning threshold : 1.7378 mW / 2.40 dBm
Laser rx power low warning threshold : 0.1122 mW / -9.50 dBm
Lane 3
Laser bias current : 6.981 mA
Laser output power : 0.736 mW / -1.33 dBm
Laser receiver power : 0.537 mW / -2.70 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
show interfaces diagnostics optics (MX960 Router with MPC3E and 100-Gigabit DWDM OTN MIC)
user@host> show interfaces diagnostics optics et-2/0/0
Physical interface: et-2/0/0
Module temperature : 39 degrees C / 102 degrees F
Module voltage : 3.2300 V
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module not ready alarm : Off
Module low power alarm : Off
Module initialization incomplete alarm : Off
Module fault alarm : Off
Tx laser disabled alarm : Off
Rx loss of signal alarm : Off
Module temperature high alarm threshold : 90 degrees C / 194 degrees F
Module temperature low alarm threshold : -20 degrees C / -4 degrees F
Module temperature high warning threshold : 0 degrees C / 32 degrees F
Module temperature low warning threshold : 0 degrees C / 32 degrees F
Module voltage high alarm threshold : 3.6300 V
Module voltage low alarm threshold : 2.9700 V
Module voltage high warning threshold : 0.0000 V
Module voltage low warning threshold : 0.0000 V
Rx power high alarm threshold : 6.5535 mW / 8.16 dBm
Rx power low alarm threshold : 0.0028 mW / -25.53 dBm
Rx power high warning threshold : 6.5535 mW / 8.16 dBm
Rx power low warning threshold : 0.0028 mW / -25.53 dBm
LOS alarm threshold : 0.0028 mW / -25.53 dBm
LOS warning threshold : 0.0028 mW / -25.53 dBm
Modem lock state : OK
Lane 0
Tx power : 1.000 mW / 0.00 dBm
Module temperature : 51 degrees C / 124 degrees F
Rx power (total) : 0.644 mW / -1.91 dBm
Rx power (signal) : 0.618 mW / -2.09 dBm
Lane chromatic dispersion : -22 ps/nm
Lane differential group delay : 5 ps
Lane Q2 factor : 14.20 dB
Lane carrier frequency offset : -534 Mz
Lane electrical SNR : 9.20 dB
Tx power high alarm : Off
Tx power low alarm : Off
Tx power high warning : Off
Tx power low warning : Off
Rx power high alarm : Off
Rx power low alarm : Off
Rx power high warning : Off
Rx power low warning : Off
Rx loss of signal alarm : Off
Wavelength unlocked alarm : Off
show interfaces diagnostics optics (MX960 Router with MPC10E-10C-MRATE, MPC10E-15C-MRATE line cards)
user@host> show interfaces diagnostics optics et-0/2/4
Physical interface: et-0/2/4
Module temperature : 58 degrees C / 136 degrees F
Module voltage : 3.2440 V
Wavelength channel number : 28
Wavelength setpoint : 1550.12 nm
Tx dither : Disabled
Frequency error : 0.00 GHz
Wavelength error : 0.00 nm
TEC fault alarm : False
Wavelength unlocked alarm : False
Tx tune alarm : False
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module temperature high alarm threshold : 76 degrees C / 169 degrees F
Module temperature low alarm threshold : -6 degrees C / 21 degrees F
Module temperature high warning threshold : 73 degrees C / 163 degrees F
Module temperature low warning threshold : -3 degrees C / 27 degrees F
Module voltage high alarm threshold : 3.7000 V
Module voltage low alarm threshold : 2.9990 V
Module voltage high warning threshold : 3.5990 V
Module voltage low warning threshold : 3.0490 V
Laser bias current high alarm threshold : Not supported
Laser bias current low alarm threshold : Not supported
Laser bias current high warning threshold : Not supported
Laser bias current low warning threshold : Not supported
Laser output power high alarm threshold : 0.1995 mW / -7.00 dBm
Laser output power low alarm threshold : 0.0158 mW / -18.01 dBm
Laser output power high warning threshold : 0.1585 mW / -8.00 dBm
Laser output power low warning threshold : 0.0200 mW / -16.99 dBm
Laser rx power high alarm threshold : 2.5119 mW / 4.00 dBm
Laser rx power low alarm threshold : 0.0050 mW / -23.01 dBm
Laser rx power high warning threshold : 1.9953 mW / 3.00 dBm
Laser rx power low warning threshold : 0.0100 mW / -20.00 dBm
Laser temperature high alarm threshold : 0 degrees C / 32 degrees F
Laser temperature low alarm threshold : 0 degrees C / 32 degrees F
Laser temperature high warning threshold : 0 degrees C / 32 degrees F
Laser temperature low warning threshold : 0 degrees C / 32 degrees F
Lane 0
Laser bias current : 242.600 mA
Laser output power : 0.131 mW / -8.82 dBm
Laser receiver power : 0.119 mW / -9.23 dBm
Laser temperature : 58 degrees C / 136 degrees F
Lane chromatic dispersion : 0.0 ps/nm
Lane differential group delay : 39.1 ps
Lane carrier frequency offset : -257.0 MHz
Lane polarization dependent loss : 0.5 dB
Lane snr : 34.50 dB
Lane Optical signal-to-noise ratio : 37.5 dB
Lane sopmd : 0.0
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Tx laser disabled alarm : Offshow interfaces diagnostics optics (PTX3000 Router with 5-port 100-Gigabit DWDM OTN PIC
user@host> show interfaces diagnostics optics et-4/0/0
Physical interface: et-4/0/0
Laser output power : 54 degrees C / 129 degrees F
Tx module temperature : 0.0000
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module not ready alarm : Off
Module low power alarm : Off
Module initialization incomplete alarm : Off
Module fault alarm : Off
PLD Flash initialization fault alarm : Off
Power supply fault alarm : Off
Checksum fault alarm : Off
Tx laser disabled alarm : Off
Rx loss of signal alarm : Off
Module temperature high alarm threshold : 80 degrees C / 176 degrees F
Module temperature low alarm threshold : 0 degrees C / 32 degrees F
Module temperature high warning threshold : 65 degrees C / 149 degrees F
Module temperature low warning threshold : 5 degrees C / 41 degrees F
Module voltage high alarm threshold : 0.0000 V
Module voltage low alarm threshold : 0.0000 V
Module voltage high warning threshold : 0.0000 V
Module voltage low warning threshold : 0.0000 V
Rx power high alarm threshold : 0.0000 mW / - Inf dBm
Rx power low alarm threshold : 0.0000 mW / - Inf dBm
Rx power high warning threshold : 0.0000 mW / - Inf dBm
Rx power low warning threshold : 0.0000 mW / - Inf dBm
LOS alarm threshold : 0.0158 mW / -18.01 dBm
LOS warning threshold : 0.0251 mW / -16.00 dBm
Modem lock state : OK
Lane 0
Tx power : 1.000 mW / 0.00 dBm
Module temperature : 0 degrees C / 32 degrees F
Rx power (total) : 0.000 mW / - Inf dBm
Rx power (signal) : 0.999 mW / -0.00 dBm
Lane chromatic dispersion : 6 ps/nm
Lane differential group delay : 3 ps
Lane Q2 factor : 15.40 dB
Lane carrier frequency offset : 0 MHz
Lane electrical SNR : 16.60 dB
Tx power high alarm : Off
Tx power low alarm : Off
Tx power high warning : Off
Tx power low warning : Off
Rx power high alarm : Off
Rx power low alarm : Off
Rx power high warning : Off
Rx power low warning : Off
Rx loss of signal alarm : Off
Wavelength unlocked alarm : Off
Laser end-of-life alarm : Off
Lane 1
Tx power : 1.000 mW / 0.00 dBm
Module temperature : 0 degrees C / 32 degrees F
Rx power (total) : 0.000 mW / - Inf dBm
Rx power (signal) : 0.999 mW / -0.00 dBm
Tx power high alarm : Off
Tx power low alarm : Off
Tx power high warning : Off
Tx power low warning : Off
Rx power high alarm : Off
Rx power low alarm : Off
Rx power high warning : Off
Rx power low warning : Off
Rx loss of signal alarm : Off
Wavelength unlocked alarm : Off
Laser end-of-life alarm : Off
Lane 2
Tx power : 1.000 mW / 0.00 dBm
Module temperature : 0 degrees C / 32 degrees F
Rx power (total) : 0.000 mW / - Inf dBm
Rx power (signal) : 0.999 mW / -0.00 dBm
Tx power high alarm : Off
Tx power low alarm : Off
Tx power high warning : Off
Tx power low warning : Off
Rx power high alarm : Off
Rx power low alarm : Off
Rx power high warning : Off
Rx power low warning : Off
Rx loss of signal alarm : Off
Wavelength unlocked alarm : Off
Laser end-of-life alarm : Off
Lane 3
Tx power : 1.000 mW / 0.00 dBm
Module temperature : 0 degrees C / 32 degrees F
Rx power (total) : 0.000 mW / - Inf dBm
Rx power (signal) : 0.999 mW / -0.00 dBm
Tx power high alarm : Off
Tx power low alarm : Off
Tx power high warning : Off
Tx power low warning : Off
Rx power high alarm : Off
Rx power low alarm : Off
Rx power high warning : Off
Rx power low warning : Off
Rx loss of signal alarm : Off
Wavelength unlocked alarm : Off
Laser end-of-life alarm : Off
show interfaces diagnostics optics (for VCP)
user@host> show interfaces diagnostics optics vcp-2/0/1
Physical interface: vcp-2/0/1
Laser bias current : 5.494 mA
Laser output power : 0.2960 mW / -5.29 dBm
Module temperature : 22 degrees C / 71 degrees F
Module voltage : 3.2810 V
Receiver signal average optical power : 0.2426 mW / -6.15 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 17.000 mA
Laser bias current low alarm threshold : 1.000 mA
Laser bias current high warning threshold : 14.000 mA
Laser bias current low warning threshold : 2.000 mA
Laser output power high alarm threshold : 0.6310 mW / -2.00 dBm
Laser output power low alarm threshold : 0.0670 mW / -11.74 dBm
Laser output power high warning threshold : 0.6310 mW / -2.00 dBm
Laser output power low warning threshold : 0.0790 mW / -11.02 dBm
Module temperature high alarm threshold : 95 degrees C / 203 degrees F
Module temperature low alarm threshold : -25 degrees C / -13 degrees F
Module temperature high warning threshold : 90 degrees C / 194 degrees F
Module temperature low warning threshold : -20 degrees C / -4 degrees F
Module voltage high alarm threshold : 3.900 V
Module voltage low alarm threshold : 2.700 V
Module voltage high warning threshold : 3.700 V
Module voltage low warning threshold : 2.900 V
Laser rx power high alarm threshold : 1.2590 mW / 1.00 dBm
Laser rx power low alarm threshold : 0.0100 mW / -20.00 dBm
Laser rx power high warning threshold : 0.7940 mW / -1.00 dBm
Laser rx power low warning threshold : 0.0158 mW / -18.01 dBm
show interfaces diagnostics optics (MPC7 with interfaces disabled)
user@host> show interfaces diagnostics optics et-3/0/0
Physical interface: et-3/0/0
Module temperature : 34 degrees C / 93 degrees F
Module voltage : 3.2660 V
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module temperature high alarm threshold : 75 degrees C / 167 degrees F
Module temperature low alarm threshold : -5 degrees C / 23 degrees F
Module temperature high warning threshold : 70 degrees C / 158 degrees F
Module temperature low warning threshold : 0 degrees C / 32 degrees F
Module voltage high alarm threshold : 3.6300 V
Module voltage low alarm threshold : 2.9700 V
Module voltage high warning threshold : 3.4640 V
Module voltage low warning threshold : 3.1340 V
Laser bias current high alarm threshold : 9.999 mA
Laser bias current low alarm threshold : 0.499 mA
Laser bias current high warning threshold : 9.499 mA
Laser bias current low warning threshold : 0.999 mA
Laser output power high alarm threshold : 0.0000 mW / - Inf dBm
Laser output power low alarm threshold : 0.0000 mW / - Inf dBm
Laser output power high warning threshold : 0.0000 mW / - Inf dBm
Laser output power low warning threshold : 0.0000 mW / - Inf dBm
Laser rx power high alarm threshold : 2.1878 mW / 3.40 dBm
Laser rx power low alarm threshold : 0.0446 mW / -13.51 dBm
Laser rx power high warning threshold : 1.7378 mW / 2.40 dBm
Laser rx power low warning threshold : 0.1122 mW / -9.50 dBm
Lane 0
Laser bias current : 6.697 mA
Laser output power : 0.738 mW / -1.32 dBm
Laser receiver power : 0.790 mW / -1.02 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Tx laser disabled alarm : Off
Lane 1
Laser bias current : 6.961 mA
Laser output power : 0.908 mW / -0.42 dBm
Laser receiver power : 0.827 mW / -0.83 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Tx laser disabled alarm : Off
Lane 2
Laser bias current : 6.926 mA
Laser output power : 0.888 mW / -0.51 dBm
Laser receiver power : 0.820 mW / -0.86 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Tx laser disabled alarm : Off
Lane 3
Laser bias current : 6.817 mA
Laser output power : 0.846 mW / -0.73 dBm
Laser receiver power : 0.827 mW / -0.82 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Tx laser disabled alarm : Off
show interfaces diagnostics optics for 100-Gigabit Ethernet (QSFP-100GE-DWDM2)
user@host> show interfaces diagnostics optics et-18/0/2
Physical interface: et-18/0/2
Module temperature : 37 degrees C / 98 degrees F
Module voltage : 3.2770 V
Grid Channel Number : 1 (191.40 THz)
Corrected Error Ratio : (6379 sec average) 3.29e-05
Uncorrected Words Ratio : (6379 sec average) 0.0e-05
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module temperature high alarm threshold : 79 degrees C / 174 degrees F
Module temperature low alarm threshold : -4 degrees C / 25 degrees F
Module temperature high warning threshold : 75 degrees C / 167 degrees F
Module temperature low warning threshold : 0 degrees C / 32 degrees F
Module voltage high alarm threshold : 3.6300 V
Module voltage low alarm threshold : 2.9700 V
Module voltage high warning threshold : 3.4640 V
Module voltage low warning threshold : 3.1340 V
Laser bias current high alarm threshold : 109.999 mA
Laser bias current low alarm threshold : 19.999 mA
Laser bias current high warning threshold : 99.999 mA
Laser bias current low warning threshold : 29.999 mA
Laser output power high alarm threshold : 3.5481 mW / 5.50 dBm
Laser output power low alarm threshold : 0.2344 mW / -6.30 dBm
Laser output power high warning threshold : 2.8184 mW / 4.50 dBm
Laser output power low warning threshold : 0.2951 mW / -5.30 dBm
Laser rx power high alarm threshold : 3.5481 mW / 5.50 dBm
Laser rx power low alarm threshold : 0.0436 mW / -13.61 dBm
Laser rx power high warning threshold : 2.8183 mW / 4.50 dBm
Laser rx power low warning threshold : 0.0871 mW / -10.60 dBm
Lane 0
Laser bias current : 73.804 mA
Laser output power : 0.948 mW / -0.23 dBm
Laser receiver power : 0.003 mW / -25.23 dBm
Lane carrier frequency offset : 362 MHz
Lane SNR : 9.60 dB
TEC Current : 0.1 mA
Residual ISI : 125
PAM Histogram : 235
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : On
Laser receiver power high warning : Off
Laser receiver power low warning : On
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : On
Tx laser disabled alarm : Off
Lane 1
Laser bias current : 83.363 mA
Laser output power : 1.042 mW / 0.18 dBm
Laser receiver power : 0.000 mW / - Inf dBm
Lane carrier frequency offset : 362 MHz
Lane SNR : 9.60 dB
TEC Current : 0.1 mA
Residual ISI : 125
PAM Histogram : 235
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : On
Laser receiver power high warning : Off
Laser receiver power low warning : On
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : On
Tx laser disabled alarm : Off
show interfaces diagnostics optics (PTX10001-36MR) (400G ZR optics)
user@host> show interfaces diagnostics optics et-0/2/1
Physical interface: et-0/2/1
Module temperature : 59 degrees C / 138 degrees F
Module voltage : 3.247 V
Wavelength channel number : 28
Wavelength setpoint : 1550.12 nm
Tx dither : Disabled
Frequency error : 0.00 GHz
Wavelength error : 0.0 nm
TEC fault alarm : False
Wavelength unlocked alarm : False
Tx tune alarm : False
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module temperature high alarm threshold : 76 degrees C / 168 degrees F
Module temperature low alarm threshold : -6 degrees C / 21 degrees F
Module temperature high warning threshold : 73 degrees C / 163 degrees F
Module temperature low warning threshold : -3 degrees C / 26 degrees F
Module voltage high alarm threshold : 3.7 V
Module voltage low alarm threshold : 3.0 V
Module voltage high warning threshold : 3.599 V
Module voltage low warning threshold : 3.049 V
Laser bias current high alarm threshold : Not supported
Laser bias current low alarm threshold : Not supported
Laser bias current high warning threshold : Not supported
Laser bias current low warning threshold : Not supported
Laser output power high alarm threshold : 1.0 mW / 0.00 dBm
Laser output power low alarm threshold : 0.015 mW / -18.01 dBm
Laser output power high warning threshold : 0.63 mW / -2.00 dBm
Laser output power low warning threshold : 0.025 mW / -16.00 dBm
Laser rx power high alarm threshold : 1.584 mW / 1.99 dBm
Laser rx power low alarm threshold : 0.004 mW / -23.01 dBm
Laser rx power high warning threshold : 1.0 mW / 0.00 dBm
Laser rx power low warning threshold : 0.009 mW / -20.00 dBm
Laser temperature high alarm threshold : 80 degrees C / 176 degrees F
Laser temperature low alarm threshold : -80 degrees C / -112 degrees F
Laser temperature high warning threshold : 75 degrees C / 167 degrees F
Laser temperature low warning threshold : -40 degrees C / -40 degrees F
Lane 0
Laser bias current : 240.199 mA
Laser output power : 0.153 mW / -8.14 dBm
Laser temperature : 52 degrees C / 125 degrees F
Laser receiver power : 0.134 mW / -8.69 dBm
Lane chromatic dispersion : 1.0 ps/nm
Lane differential group delay : 4.0 ps
Lane carrier frequency offset : 0.0 MHz
Lane polarization dependent loss : 0.8 dB
Lane snr : 17.9 dB
Lane Optical signal-to-noise ratio : 36.3 dB
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser temperature high alarm : Off
Laser temperature low alarm : Off
Laser temperature high warning : Off
Laser temperature low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Tx laser disabled alarm : Offshow interfaces diagnostics optics (PTX10001-36MR) (400G ZR-M optics)
user@host> show interfaces diagnostics optics et-0/0/10
Physical interface: et-0/0/10
Module temperature : 56 degrees C / 132 degrees F
Module voltage : 3.202 V
Wavelength channel number : 28
Wavelength setpoint : 1550.12 nm
Tx dither : Disabled
Frequency error : 0.00 GHz
Wavelength error : 0.0 nm
TEC fault alarm : False
Wavelength unlocked alarm : False
Tx tune alarm : False
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module temperature high alarm threshold : 76 degrees C / 168 degrees F
Module temperature low alarm threshold : -6 degrees C / 21 degrees F
Module temperature high warning threshold : 73 degrees C / 163 degrees F
Module temperature low warning threshold : -3 degrees C / 26 degrees F
Module voltage high alarm threshold : 3.7 V
Module voltage low alarm threshold : 3.0 V
Module voltage high warning threshold : 3.599 V
Module voltage low warning threshold : 3.049 V
Laser bias current high alarm threshold : Not supported
Laser bias current low alarm threshold : Not supported
Laser bias current high warning threshold : Not supported
Laser bias current low warning threshold : Not supported
Laser output power high alarm threshold : 1.0 mW / 0.00 dBm
Laser output power low alarm threshold : 0.015 mW / -18.01 dBm
Laser output power high warning threshold : 0.63 mW / -2.00 dBm
Laser output power low warning threshold : 0.025 mW / -16.00 dBm
Laser rx power high alarm threshold : 1.584 mW / 1.99 dBm
Laser rx power low alarm threshold : 0.001 mW / -28.23 dBm
Laser rx power high warning threshold : 1.0 mW / 0.00 dBm
Laser rx power low warning threshold : 0.004 mW / -23.01 dBm
Laser temperature high alarm threshold : 80 degrees C / 176 degrees F
Laser temperature low alarm threshold : -80 degrees C / -112 degrees F
Laser temperature high warning threshold : 75 degrees C / 167 degrees F
Laser temperature low warning threshold : -40 degrees C / -40 degrees F
Lane 0
Laser bias current : 235.695 mA
Laser output power : 0.086 mW / -10.62 dBm
Laser temperature : 52 degrees C / 125 degrees F
Laser receiver power : 0.073 mW / -11.33 dBm
Lane chromatic dispersion : 2.0 ps/nm
Lane differential group delay : 3.0 ps
Lane carrier frequency offset : -66.0 MHz
Lane polarization dependent loss : 0.6 dB
Lane snr : 19.0 dB
Lane Optical signal-to-noise ratio : 35.8 dB
Lane sopmd : 34.0
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser temperature high alarm : Off
Laser temperature low alarm : Off
Laser temperature high warning : Off
Laser temperature low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Tx laser disabled alarm : Off
show interfaces diagnostics optics (PTX10001-36MR, PTX10002-36QDD, PTX10004, PTX10008, and PTX10016) (400ZR and 400G OpenZR+ optics)
user@host> show interfaces diagnostics optics et-0/1/2
Physical interface: et-0/1/2
Module temperature : 39 degrees C / 102 degrees F
Module voltage : 3.303 V
Module max power : 5.5 W
Wavelength channel number : 28
Wavelength setpoint : 1550.12 nm
Tx dither : Disabled
Frequency error : 0.00 GHz
Wavelength error : 0 nm
TEC fault alarm : False
Wavelength unlocked alarm : False
Tx tune alarm : False
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module temperature high alarm threshold : 76 degrees C / 168 degrees F
Module temperature low alarm threshold : -6 degrees C / 21 degrees F
Module temperature high warning threshold : 73 degrees C / 163 degrees F
Module temperature low warning threshold : -3 degrees C / 26 degrees F
Module voltage high alarm threshold : 3.7 V
Module voltage low alarm threshold : 3 V
Module voltage high warning threshold : 3.599 V
Module voltage low warning threshold : 3.049 V
Laser bias current high alarm threshold : 120 mA
Laser bias current low alarm threshold : 60 mA
Laser bias current high warning threshold : 110 mA
Laser bias current low warning threshold : 70 mA
Laser output power high alarm threshold : 0.501 mW / -2.99 dBm
Laser output power low alarm threshold : 0.031 mW / -15.00 dBm
Laser output power high warning threshold : 0.316 mW / -5.00 dBm
Laser output power low warning threshold : 0.05 mW / -13.00 dBm
Laser rx power high alarm threshold : 1.584 mW / 2.00 dBm
Laser rx power low alarm threshold : 0.003 mW / -24.08 dBm
Laser rx power high warning threshold : 1.258 mW / 0.99 dBm
Laser rx power low warning threshold : 0.007 mW / -21.02 dBm
Laser temperature high alarm threshold : 59 degrees C / 138 degrees F
Laser temperature low alarm threshold : 39 degrees C / 102 degrees F
Laser temperature high warning threshold : 54 degrees C / 129 degrees F
Laser temperature low warning threshold : 44 degrees C / 111 degrees F
Lane 0
Laser bias current : 80 mA
Laser output power : 0.105 mW / -9.75 dBm
Laser temperature : 48 degrees C / 118 degrees F
Laser receiver power : 0.088 mW / -10.53 dBm
Rx power (signal) : 0.00 mW / -44.00 dBm
Lane chromatic dispersion : 3.0 ps/nm
Lane differential group delay : 1.9 ps
Lane carrier frequency offset : 415.0 MHz
Lane polarization dependent loss : 0.2 dB
Lane snr : 12.8 dB
Lane Optical signal-to-noise ratio : 23.5 dB
Lane sopmd : 28.0
Lane q-factor : 14.5 dB
Lane q-margin : 13.8 dB
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser temperature high alarm : Off
Laser temperature low alarm : Off
Laser temperature high warning : Off
Laser temperature low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Tx laser disabled alarm : Off
user@host> show interfaces diagnostics optics et-4/0/10
Physical interface: et-4/0/10
Module temperature : 50 degrees C / 122 degrees F
Module voltage : 3.287 V
Module max power : 23.75 W
Wavelength channel number : 28
Wavelength setpoint : 1550.12 nm
Tx dither : Disabled
Frequency error : 0.00 GHz
Wavelength error : 0 nm
TEC fault alarm : False
Wavelength unlocked alarm : False
Tx tune alarm : False
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Module temperature high alarm threshold : 76 degrees C / 168 degrees F
Module temperature low alarm threshold : -6 degrees C / 21 degrees F
Module temperature high warning threshold : 73 degrees C / 163 degrees F
Module temperature low warning threshold : -3 degrees C / 26 degrees F
Module voltage high alarm threshold : 3.7 V
Module voltage low alarm threshold : 3 V
Module voltage high warning threshold : 3.599 V
Module voltage low warning threshold : 3.049 V
Laser bias current high alarm threshold : Not supported
Laser bias current low alarm threshold : Not supported
Laser bias current high warning threshold : Not supported
Laser bias current low warning threshold : Not supported
Laser output power high alarm threshold : 1 mW / 0.00 dBm
Laser output power low alarm threshold : 0.015 mW / -18.01 dBm
Laser output power high warning threshold : 0.63 mW / -2.00 dBm
Laser output power low warning threshold : 0.025 mW / -16.00 dBm
Laser rx power high alarm threshold : 2.511 mW / 3.99 dBm
Laser rx power low alarm threshold : 0.002 mW / -26.02 dBm
Laser rx power high warning threshold : 1.995 mW / 2.99 dBm
Laser rx power low warning threshold : 0.004 mW / -23.01 dBm
Laser temperature high alarm threshold : 80 degrees C / 176 degrees F
Laser temperature low alarm threshold : -80 degrees C / -112 degrees F
Laser temperature high warning threshold : 75 degrees C / 167 degrees F
Laser temperature low warning threshold : -40 degrees C / -40 degrees F
Lane 0
Laser bias current : 246.695 mA
Laser output power : 0.08 mW / -10.94 dBm
Laser temperature : 48 degrees C / 118 degrees F
Laser receiver power : 0.055 mW / -12.54 dBm
Rx power (signal) : 0.05 mW / -12.94 dBm
Lane chromatic dispersion : 0.0 ps/nm
Lane differential group delay : 1.0 ps
Lane carrier frequency offset : 144.0 MHz
Lane polarization dependent loss : 0.3 dB
Lane snr : 19.1 dB
Lane Optical signal-to-noise ratio : 30.4 dB
Lane sopmd : 25.0
Lane q-factor : Not Supported
Lane q-margin : Not Supported
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser temperature high alarm : Off
Laser temperature low alarm : Off
Laser temperature high warning : Off
Laser temperature low warning : Off
Laser receiver power high alarm : Off
Laser receiver power low alarm : Off
Laser receiver power high warning : Off
Laser receiver power low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Tx loss of signal functionality alarm : Off
Rx loss of signal alarm : Off
Tx laser disabled alarm : OffRelease Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 12.1 for PTX Series routers.
Command introduced in Junos OS Release 19.2R1 for QSFP-100GE-DWDM2 transceiver on MX10003, MX10008, MX10016, and MX204 routers.