request interface mc-ae switchover (Multichassis Link Aggregation)
Syntax
request interface mc-ae switchover <immediate> mcae-id mcae-id; mcae-id mcae-id;
Description
Manually revert egress traffic from the active
node to the designated preferred node of a multichassis aggregated
Ethernet interface. You can use this command to manually switch over
traffic to the preferred node when the switchover-mode statement
for the multichassis aggregated Ethernet interface is configured as non-revertive at the [edit interfaces aeX mc-ae] hierarchy level.
To run this command successfully, the status-control statement should be configured as active at the [edit interfaces aeX mc-ae] hierarchy
level.
Options
immediate |
(Optional) Trigger immediate switchover to the preferred node. If
this option is not configured, Junos OS waits for the timer configured
using the |
mcae-id mcae-id |
Triggers switchover for the specified mc-ae interface. |
Required Privilege Level
view
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface mc-ae switchover immediate mcae-id
user@host >request interface mc-ae switchover immediate mcae-id 2
MCAE: Switchover DoneSample Output
request interface mc-ae switchover mcae-id
user@host >request interface mc-ae switchover mcae-id 2
Switchover In Progress: Please check after 1 minutes,
Use “show interfaces mc-ae revertive-info” to check for the statusRelease Information
Command introduced in Junos OS Release 13.3.