Troubleshoot an Aggregated Ethernet Interface

Problem

Solution

Check the following:

• Verify that there is no configuration mismatch.

• Verify that all member ports are up.

• Verify that a LAG is part of family ethernet—switching (Layer 2 LAG) or family inet (Layer 3 LAG).

• Verify that the LAG member is connected to the correct LAG at the other end.

• Verify that the LAG members belong to the same switch (or the same Virtual Chassis).

Problem

Solution

Traffic statistics fields for logical interfaces in show interfaces commands show only control traffic; the traffic statistics do not include data traffic. You can view the statistics for all traffic only per physical interface.

Problem

Solution

EX Series switches do not support the collection and reporting of IPv6 transit statistics.

Problem

Solution

The SNMP counters ifHCInBroadcastPkts and ifInBroadcastPkts are not supported for aggregated Ethernet interfaces on EX Series switches.