Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

inet (interfaces)

Syntax

Hierarchy Level

Description

Configure the primary IP address for the logical interface.

Junos will no longer accept duplicate IPs between different logical interfaces in the same routing instance. It is applicable to both inet and inet6. The below table lists the duplicate addresses found between different interfaces.

Table 1: Allowed Duplicate IP Address Between Different Interfaces
 

Point to Point

Management Interfaces

Non-point to point

With same APS

With no or diff APS

LSQ or PSEUDO RLSQ interfaces (fail options)

LSQ or PSEUDO_RLSQ interfaces (fail options)

Point to Point

Commit accepted

Error displayed

Error displayed

Error displayed

Error displayed

Commit accepted

Commit accepted

Management Interfaces

Error displayed

Error displayed

Error displayed

Error displayed

Error displayed

Error displayed

Error displayed

Non-point to point

Error displayed

Error displayed

Error displayed

Error displayed

Error displayed

Error displayed

Error displayed

With same APS

Error displayed

Error displayed

Error displayed

Commit accepted

Error displayed

Error displayed

Error displayed

With no or diff APS

Error displayed

Error displayed

Error displayed

Error displayed

Error displayed

Error displayed

Error displayed

LSQ or PSEUDO_RLSQ interfaces (fail options)

Commit accepted

Error displayed

Error displayed

Error displayed

Error displayed

Commit accepted

Commit accepted

LSQ or PSEUDO_RLSQ interfaces (no fail options)

Commit accepted

Error displayed

Error displayed

Error displayed

Error displayed

Commit accepted

Error displayed

APS configuration is applicable to Sonet (SO) and derivatives of Atm (AT) interfaces only.

Default

You must configure a logical interface to be able to use the physical device.

Options

The remaining statements are explained separately. See CLI Explorer.

Required Privilege Level

interface—To view this statement in the configuration.interface-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 11.1.