family
Syntax
The ethernet-switching statement and all
of its substatements are not supported on OCX Series switches.
family {
ethernet-switching {
filter {
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
}
interface-mode (access | trunk);
recovery-timeout seconds;
storm-control profile-name;
vlan {
members (vlan-name |[-vlan-names] | all);
}
}
fibre-channel {
port-mode (f-port | np-port);
}
inet {
accounting {
destination-class-usage;
source-class-usage {
input;
output;
}
}
address ipv4-address {
arp ip-address (mac | multicast-mac) mac-address <publish>;
broadcast address;
preferred;
primary;
vrrp-group group-number {
(accept-data | no-accept-data);
advertise–interval seconds;
advertisements-threshold number;
authentication-key key;
authentication-type authentication;
fast-interval milliseconds;
(preempt | no-preempt) {
hold-time seconds;
}
priority number;
track {
interface interface-name {
priority-cost number;
}
priority-hold-time seconds;
route ip-address/mask routing-instance instance-name priority-cost cost;
}
virtual-address [addresses];
vrrp-inherit-from {
active-group group-number;
active-interface interface-name;
}
}
}
filter {
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
}
mtu bytes;
no-neighbor-learn;
no-redirects;
primary;
rpf-check {
fail-filter filter-name;
mode {
loose;
}
}
}
inet6 {
accounting {
destination-class-usage;
source-class-usage {
input;
output;
}
}
address address {
eui-64;
ndp ip-address (mac | multicast-mac) mac-address <publish>;
preferred;
primary;
vrrp-inet6-group group-id {
accept-data | no-accept-data;
advertisements-threshold number;
authentication-key key;
authentication-type authentication;
fast-interval milliseconds;
inet6-advertise-interval milliseconds;
preempt | no-preempt {
hold-time seconds;
}
priority number;
track {
interface interface-name {
priority-cost number;
}
priority-hold-time seconds;
route ip-address/mask routing-instance instance-name priority-cost cost;
}
virtual-inet6-address [addresses];
virtual-link-local-address ipv6–address;
vrrp-inherit-from {
active-group group-name;
active-interface interface-name;
}
}
}
(dad-disable | no-dad-disable);
filter {
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
}
mtu bytes;
nd6-stale-time time;
no-neighbor-learn;
no-redirects;
policer {
input policer-name;
output policer-name;
}
rpf-check {
fail-filter filter-name;
mode {
loose;
}
}
mpls {
filter {
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
}
mtu bytes;
}
}
}
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number], [edit interfaces interface-range interface-name unit logical-unit-number family]
Description
Configure protocol family information for the logical interface on the QFX Series and OCX Series product.
Default
The ethernet-switching statement and all of
its substatements are not asupported on OCX Series switches.
Access interfaces on the QFX Series are set to family ethernet-switching by default. If you are going to change the family setting for an interface, you might have to delete this default setting or any user-configured family setting first.
You must configure a logical interface to be able to use the physical device.
Options
Interface types on the switch are:
Aggregated Ethernet (ae)
Gigabit Ethernet (ge)
Loopback (lo0)
Management Ethernet (me0)
Routed VLAN interface (RVI) (vlan)
Note:Routed VLAN interfaces, also referred to as integrated routing and bridging (IRB) interfaces, are not supported on OCX Series switches.
10-Gigabit Ethernet (xe)
Not all interface types support all family substatements. Check your switch CLI for supported substatements for a particular protocol family configuration.
Required Privilege Level
interface—To view this statement in the configuration.interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.1.