Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

speed (Ethernet)

Syntax (ACX Series, EX Series, MX Series)

Syntax (ACX5448, ACX710)

Syntax (ACX5448-D)

Syntax (ACX5448-M)

Syntax (ACX7100)

Syntax (ACX7509)

These are supported speeds of ACX7509-FPC-20Y, ACX7509-FPC-16C, and ACX7509-FPC-4CD line cards of ACX7509.

Syntax (EX Series)

Syntax (EX2300)

Syntax (EX4300)

Syntax (EX4600, OCX1100, QFX Series)

Syntax (QFX5100-48T)

Syntax (QFX5130-32CD, QFX5700)

Hierarchy Level (ACX Series, EX Series, MX Series)

Hierarchy Level (EX Series)

Hierarchy Level (ACX5448, ACX5448-D, ACX710, ACX7100, EX2300, EX4300, EX4600, OCX Series, QFX Series, QFX5100-48T, QFX5130-32CD, QFX5700)

Description

Configure the interface speed. This statement applies to the following interfaces:

  • Management Ethernet interface (fxp0 or em0)

  • Fast Ethernet 12-port and 48-port PICs

  • Built-in Fast Ethernet port on the FIC (M7i router)

  • Combo Line Rate DPCs and Tri-Rate Ethernet Copper interfaces on MX Series routers

  • Gigabit Ethernet interfaces on EX Series switches

If you enable autonegotiation, then the device automatically negotiates the speed based on the speed of the other end of the link. Table 1 describes the autonegotiation option available for different platforms:

Table 1: Autonegotiation Options

Autonegotiation Option

Description

auto-negotiation

Automatically negotiate the speed based on the speed of the other end of the link.

auto

Automatically negotiate the speed (10 Mbps, 100 Mbps, or 1 Gbps) based on the speed of the other end of the link.

auto-10m-100m

Automatically negotiate the speed (10 Mbps or 100 Mbps) based on the speed of the other end of the link.

See Speed and Autonegotiation for more details.

Options

Routers support autonegotiation by default. To enable or disable autonegotiation, see autonegotiation (Routers). Table 2 summarizes the speed and autonegotiation supported on different routing platforms:

Table 2: Speed and Autonegotiation support on Routers

Router

Speed

Autonegotiation Supported (Yes/No) ?

ACX Series

  • 10M

  • 100M

  • 1G

  • 2.5G

  • 5G

  • 10G

  • auto

  • auto-10m-100m

Yes

ACX5448, ACX710

  • 10G

  • 25G

  • 40G

  • 100G

  • 100M

  • 1G

  • auto

Yes

ACX5448-D

  • 10G

  • 25G

  • 40G

  • 100G

  • 100M

  • 1G

  • auto

Yes

ACX5448-M

  • 10G

  • 25G

  • 40G

  • 100G

  • 1G

  • auto

Yes

ACX7100

  • 10G

  • 25G

  • 40G

  • 100G

  • 200G

  • 400G

No

ACX7509-FPC-20Y

  • 1G

  • 10G

  • 25G

Yes

ACX7509-FPC-16C

  • 40G

  • 100G

No

ACX7509-FPC-4CD

  • 400G

No

MX Series

  • 10M

  • 100M

  • 1G

  • 2.5G

  • 5G

  • 10G

  • auto

  • auto-10m-100m

Yes

Switches support autonegotiation by default. To enable or disable autonegotiation, see auto-negotiation (Switches). Table 3 summarizes the speed and autonegotiation supported on different switching platforms:

Table 3: Speed and Autonegotiation Support on Switches

Switch

Speed

Autonegotiation Support (Yes/No/NA)?

Autosense Support (Yes/No/NA)

HGoE Support (Yes/No/NA)?

EX2300-12 T or P, EX2300-24/48 T or P, and EX2300-24/48 MP

RJ-45 Interfaces

  • 10 Mbps

  • 100 Mbps

  • 1 Gbps

  • 2.5 Gbps (MP model only)

  • Auto (default)

Yes

 NA NA

  • 4 x built-in fiber SFP+ interfaces (EX2300-24MP)

  • 6 x built-in fiber SFP+ interfaces (EX2300-48MP)

 No Yes No
EX3400-24/48 T or P

RJ-45 Interfaces

  • 10 Mbps

  • 100 Mbps

  • 1 Gbps

  • Auto (default)

Yes

 NA NA
4 x built-in SFP+ interfaces (Network default) No Yes

No

2 x built-in QSFP+ interfaces (VCP default)

      

  • 40 Gbps

Yes

 Yes No

EX4300-24/48 T or P and EX4300-48 MP

RJ-45 interfaces

  • 10 Mbps (EX4300-24/48 T or P only)

  • 100 Mbps

  • 1 Gbps

  • 2.5 Gbps (MP models only; 24 maximum)

  • 5 Gbps (MP models only; 24 maximum)

  • 10 Gbps (MP models only; 24 maximum)

  • Auto (default)

Yes

 NA NA
4 x built-in VCP (default) QSFP+ interfaces

  • 40 Gbps

 No Yes No

EX4300-32F

32 x 1 Gbps (SFP ports)

Yes

Yes

No

8 x 1/10 Gbps (SFP+ ports)

No

Yes

No

2 x 40 Gbps (QSFP+ ports)

No

Note:

If 40G is a DAC and used as network port, AN is enabled. For all other cases, AN is not enabled.

Yes

No

EX4300 Uplink Modules

        

EX-UM-4X4SFP (Non-MP Model)

4 x SFP+ interfaces

 No Yes No
EX-UM-4SFPP-MR (MP Model) 4 x SFP+ interfaces No Yes No
EX-UM-2QSFP-MR (MP Model) 2 x QSFP+ interfaces

  • 40 Gbps

  • 100 Gbps

  • Channelized into 4x10 Gbps

  • Channelized into 4x25 Gbps

 No Yes No
EX4100-F 12 P/T (No Macsec)

RJ-45 interfaces (PIC0)

  • 10 Mbps

  • 100 Mbps

  • 1000 Mbps

Yes

 NA

NA

RJ-45 interfaces (PIC2)

  • 100 Mbps

  • 1000 Mbps

  • 1 Gbps

  • 2.5 Gbps

  • 5 Gpps

  • 10 Gbps

Yes

 NA

NA

Built-in SFP+ interfaces (PIC1) (VCP default)

  • 1 Gbps (Network mode only)

  • 10 Gbps

No

 Yes

No

EX4100 24/48 T or P and EX4100-24/48 MP

Note:

MACsec is supported only in Multigigabit ports and 4x10 GbE uplink module.

RJ-45 interfaces

  • 10 Mbps

  • 100 Mbps

  • 1 Gbps

  • 2.5 Gbps (MP model only)

  • 5 Gbps (24MPmodel only)

  • 10 Gbps (24MP model only)

  • Auto

Yes

 NA NA
4 x built-in VCP SFP28 Interfaces (VCP Default)

  • 1 Gbps (only in network mode)

  • 10 Gbps

  • 25 Gbps (default)

 No Yes No
4 x built-in SFP+ interfaces (Network default)

  • 100 Mbps

  • 1 Gbps

  • 10 Gbps

 No Yes No

EX4100-F 24/48 T or P (no MACsec)

RJ-45 interfaces

  • 10 Mbps

  • 100 Mbps

  • 1 Gbps

  • Auto

Yes

 NA NA
Built-in VCP SFP+ interfaces

  • 1 Gbps (only in network mode)

  • 10 Gbps

No Yes No
Fiber SFP+ Interfaces

  • 100 Mbps

  • 1 Gbps

  • 10 Gbps

 No Yes No

EX4400 24/48 T or P and EX4400-24/48 MP (has MACsec support on all interfaces except built-in 100 GbE ports)

RJ-45 interfaces

  • 10 Mbps ( (EX4400 24/48 T or P only)

  • 100 Mbps

  • 1 Gbps

  • 2.5 Gbps (MP Model only)

  • 5 Gbps (MP Model only)

  • 10 Gbps (MP Model only)

  • Auto

Yes

 NA NA
2 x 100 GbE QSFP28 interfaces (No MACsec; by default VCP)

  • 100 Gbps

  • 40 Gbps

  • Channelized 4 x 10 Gbps; supported for 40 GbE when changed to Network Interface from VCP.

  • Channelized 4x25 Gbps; supported for 100 GbE when changed to Network Interface from VCP

 NA Yes Yes
EX4400-48 F

  • 10 Mbps (SFP-T on 0-35 ports)

  • 100 Mbps (SFP-T on 0-35 ports)

  • 36x1 Gbps (SFP)

  • 12x1/10 Gbps (SFP+)

 Yes (for 36 PIC0 ports) Yes Yes (22.3R1 onwards)
Note:

HGoE is not supported on PIC0 ports.
2 x 100 GbE QSFP28 interfaces (No MACsec; by default VCP)

  • 40 Gbps

  • 100 Gbps

  • Channelized 4 x 10 Gbps; supported for 40 Gbps when changed to Network Interface from VCP.

  • Channelized 4x25 Gbps; supported for 100 Gbps when changed to Network Interface from VCP

 No Yes Yes (22.3R1 onwards)
EX4400-24X

  • 24x1/10 GbE (SFP+)

 No Yes NA
2 x 100 GbE QSFP28 interfaces (Supports MACsec; by default VCP)

  • 100 Gbps

  • 40 Gbps

  • Channelized 4 x 10 Gbps; supported for 40 Gbps when changed to Network Interface from VCP.

  • Channelized 4x25 GbE; supported for 100 GbE when changed to Network Interface from VCP

 No Yes Yes (23.1R1 onwards)

EX4400-EM-4S (No MACsec Support)

4 x SFP+ interfaces

No

 No NA
EX4400-EM-4Y (has MACsec Support) 4 x SFP28 Network interfaces

  • 1 Gbps (23.1R1 onwards)

  • 10 Gbps

  • 25 Gbps (default)

 No No Yes (22.3R1 onwards)
EX4400-EM-1C (has MACsec Support) 1 x QSFP28 Network Interface

  • 100 Gbps

  • 40 Gbps

  • Channelized 4 x 10 Gbps supported for 40 Gbps (supports HGoE)

  • Channelized 4x25 Gbps supported for 100 Gbps (supports HGoE)

 No Yes Yes (23.1R1 onwards)

EX4600-40F

24 x 1/10 Gbps (SFP+)

No

Yes

No

4 x 40 Gbps (QSFP+)

No

Yes

No
OCX1100, QFX Series, QFabric

  • 100 Mbps

  • 1 Gbps

  • 10 Gbps

 No   No
QFX5100-48T

  • 100 Mbps

  • 1 Gbps

  • 10 Gbps

  • Auto

 Yes   No
QFX5110-48S (connected with QFX-SFP-1GE-T transceiver)

  • 100 Mbps

  • 1 Gbps

  • 10 Gbps

  • 40 Gbps

  • 100 Gbps

  • Auto

 Yes   No
QFX5130-32CD

  • 400 Gbps

  • 100 Gbps

  • 40 Gbps

  • 25 Gbps

  • 10 Gbps

     No
QFX5110-48S and QFX5100-48S (connected with JNP-SFPP-10GE-T transceiver)

  • 100 Mbps

  • 1 Gbps

  • 10 Gbps

 Yes   No
QFX5120-48Y (connected with JNP-SFPP-10GE-T transceiver)

  • 1 Gbps

  • 10 Gbps

 No   No
QFX5130-32CD

  • 400 Gbps

  • 100 Gbps

  • 40 Gbps

  • 25 Gbps

  • 10 Gbps

 No   No

QFX5700

  • 400 Gb-ps

  • 100 Gbps

  • 40 Gbps

  • 25 Gbps

  • 10 Gbps

No

   No

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Release Information

Statement introduced before Junos OS Release 7.4.

Statement introduced in Junos OS Release 9.0 for EX Series switches.

Statement introduced in Junos OS Release 11.1 for the QFX Series.

Statement introduced in Junos OS Release 12.2 for ACX Series Universal Metro Routers.

Statement introduced in Junos OS Release 13.2X50-D10 for EX Series switches.

Speed option 2.5Gbps introduced in Junos OS Release 18.1R2 for EX2300 switch.

Speed option 10Gbps and 5Gbps introduced in Junos OS Release 18.2R1 for EX4300 switch.

Speed option 1-Gbps is introduced in Junos OS Release 19.1R1 on the 4-port 1-Gigabit Ethernet/10-Gigabit Ethernet uplink module on EX4300-48MP switches.

Speed options 100-Mbps, 1-Gbps, and auto is introduced in Junos OS Releases 18.4R1S2, 18.4R2, and 19.2R1 and later for ACX5448 Universal Metro Routers.

Speed option 10Gbps, 40Gbps, and 100Gbps introduced in Junos OS Evolved Release 19.1R1 for PTX10003-80C, PTX10003-160C routers.

Speed options 100-Gbps, 40-Gbps, 25-Gbps, and 10-Gbps introduced in Junos OS Release 19.2R1-S1 for ACX5448-D routers.

Related Documentation