show services nat deterministic-nat nat-port-block
Syntax
show services nat deterministic-nat nat-port-block internal-host
Description
Display the translated NAT address and port ranges for the given internal host.
Options
| internal-host | IP address of the internal host. |
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show services nat deterministic-nat
nat-port-block command. Output fields are listed in the approximate
order in which they appear.
Field Name |
Field Description |
|---|---|
|
Name of a service interface. |
|
Name of a service set. Individual empty service sets are not displayed, but if none of the service sets has any flows, a flow table header is printed for each service set. |
|
Private IP address of a subscriber on the access network. |
|
NAT public IP address |
|
Lowest port number in range of assigned ports. |
|
Highest port number in range of assigned ports. |
Sample Output
run show services nat deterministic-nat nat-port-block
user@host> show services nat deterministic-nat nat-port-block 192.0.2.1 Service set: ss1 Interface: sp-2/0/0 NAT pool: pool1 Internal Host: 192.0.2.1, NAT IP Address: 203.0.113.1, NAT Port Start: 1024, NAT Port End: 1279
Release Information
Command introduced in Junos OS Release 12.1.