Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

show security idp active-policy

Syntax

Description

Display information about the policy name and running detector version with which the policy is compiled from the IDP data plane module.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show security idp active-policy command. Output fields are listed in the approximate order in which they appear.

Table 1: show security idp active-policy Output Fields

Field Name

Field Description

Policy Name

Name of the running policy.

Running Detector Version

Current version of the running detector.

Sample Output

show security idp active-policy

Release Information

Command introduced in Junos OS Release 9.2.

Starting with Junos OS Release 18.2R1, IDP policy is directly assigned in the security policy rule. This is to simplify IDP policy usage and to provide flexibility to have multiple policies active at the same time. As a part of session interest check IDP will enabled if IDP policy is present in any of the matched rules. IDP policy is activated in security policies, by permitting the IDP policy within the application services using the set security policies from-zone zone-name to-zone zone-name policy policy-name then permit application-services idp-policy idp-policy-name command. Since IDP policy name is directly use in the security policy rule, the [edit security idp active-policy policy-name] statement is deprecated.

Related Documentation