Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


show redundant-power-system status



Display the status information for the switch connectors on the Redundant Power System (RPS).

Required Privilege Level


Output Fields

Table 1 lists the output fields for the show redundant-power-system status command. Output fields are listed in the approximate order in which they appear.

Table 1: show redundant-power-system status Output Fields

Field Name

Field Description

Level of Output


Serial number of the RPS.

All levels


Number of the switch connector.

All levels


Status of the switch connector:

  • ARMED—The switch is ready to get backup power from RPS if power supply fails on the switch.

  • OFF—The switch has zero and is not configured to receive backup power from RPS.

  • BACKED-UP—The switch is receiving power backup from RPS.

  • OVER-SUBSCRIBED—The switch cannot receive backup power from RPS even if you set the .

All levels


Priority value of the switch connector.

All levels


Power requested by the switch on the corresponding switch connector.

All levels

Sample Output

show redundant-power-system status (Standalone Switch)

show redundant-power-system status (EX3300 Virtual Chassis)

Release Information

Command introduced in Junos OS Release 12.1.