Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show (ospf | ospf3) overview

Syntax

Syntax (EX Series Switch and QFX Series)

Description

Display Open Shortest Path First (OSPF) overview information.

Options

none

Display standard information about all OSPF neighbors for all routing instances.

brief | extensive

(Optional) Display the specified level of output.

instance instance-name

(Optional) Display all OSPF interfaces under the named routing instance.

logical-system (all | logical-system-name)

(Optional) Perform this operation on all logical systems or on a particular logical system.

realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)

(Optional) (OSPFv3 only) Display information about the specified OSPFv3 realm, or address family. Use the realm option to specify an address family for OSPFv3 other than IPv6 unicast, which is the default.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show ospf overview command. Output fields are listed in the approximate order in which they appear.

Table 1: show ospf overview Output Fields

Field name

Field Description

Level of Output

Instance

OSPF routing instance.

All levels

Router ID

Router ID of the routing device.

All levels

Route table index

Route table index.

All levels

Configured overload

Overload capability is enabled. If the overload timer is also configured, display the time that remains before it is set to expire. This field is not displayed after the timer expires.

All levels

Topology

Topology identifier.

All levels

Prefix export count

Number of prefixes exported into OSPF.

All levels

Full SPF runs

Number of complete Shortest Path First calculations.

All levels

SPF delay

Delay before performing consecutive Shortest Path First calculations.

All levels

SPF holddown

Delay before performing additional Shortest Path First (SPF) calculations after the maximum number of consecutive SPF calculations is reached.

All levels

SPF rapid runs

Maximum number of Shortest Path First calculations that can be performed in succession before the hold-down timer begins.

All levels

LSA refresh time

Refresh period for link-state advertisement (in minutes).

All levels

SPRING

Source protocol routing in networking: enable or disable.

All levels

Node Segments

Nodes of source protocol routing in networking:enable or disable.

All levels

Ipv4 Index

Ipv4 Index.

All levels

Index Range

Ipv4 Index range.

All levels

Node Segment Blocks Allocated

Details about node segment blocks.

All levels

Database protection state

Current state of database protection.

All levels

Warning threshold

Threshold at which a warning message is logged (percentage of maximum LSA count).

All levels

Non self-generated LSAs

Number of LSAs whose router ID is not equal to the local router ID: Current, Warning (threshold), and Allowed.

All levels

Ignore time

How long the database has been in the ignore state.

All levels

Reset time

How long the database must stay out of the ignore or isolated state before it returns to normal operations.

All levels

Ignore count

Number of times the database has been in the ignore state: Current and Allowed.

All levels

Restart

Graceful restart capability: enabled or disabled.

All levels

Restart duration

Time period for complete reacquisition of OSPF neighbors.

All levels

Restart grace period

Time period for which the neighbors should consider the restarting routing device as part of the topology.

All levels

Graceful restart helper mode

(OSPFv2) Standard graceful restart helper capability (based on RFC 3623): enabled or disabled.

All levels

Restart-signaling helper mode

(OSPFv2) Restart signaling-based graceful restart helper capability (based on RFC 4811, RFC 4812, and RFC 4813): enabled or disabled.

All levels

Helper mode

(OSPFv3) Graceful restart helper capability: enabled or disabled.

All levels

Trace options

OSPF-specific trace options.

extensive

Trace file

Name of the file to receive the output of the tracing operation.

extensive

Area

Area number. Area 0.0.0.0 is the backbone area.

All levels

Stub type

Stub type of area: Normal Stub, Not Stub, or Not so Stubby Stub.

All levels

Authentication Type

Type of authentication: None, Password, or MD5.

Note:

The Authentication Type field refers to the authentication configured at the [edit protocols ospf area area-id] level. Any authentication configured for an interface in this area will not affect the value of this field.

All levels

Area border routers

Number of area border routers.

All levels

Neighbors

Number of autonomous system boundary routers.

All levels

Sample Output

show ospf overview (without SRGB)

show ospf overview (with SRGB)

show ospf overview (With Database Protection)

show ospf3 overview (With Database Protection)

show ospf overview extensive

Release Information

Command introduced in Junos OS Release 7.4.

realm option introduced in Junos OS Release 9.2.

Database protection introduced in Junos 10.2.