satellite (Junos Fusion Automatic Satellite Conversion)
Syntax
satellite [slot-id | range | all];
Hierarchy Level
[edit chassis satellite-management auto-satellite-conversion]
Description
Specify the interface to enable automatic software conversion in a Junos Fusion.
The device that is cabled to the slot specified in this command is automatically converted into a satellite device.
Additional configuration steps are required to add satellite devices to a Junos Fusion using automatic satellite conversion. See Configuring or Expanding a Junos Fusion Enterprise or Configuring Junos Fusion Provider Edge.
Options
| slot-id | Specifies the FPC slot identifier of the device that will be automatically converted into a satellite device. The FPC identifier must be mapped to a cascade port interface before this command is operational. See Configuring or Expanding a Junos Fusion Enterprise or Configuring Junos Fusion Provider Edge. |
| range | Specifies a range of FPC slot identifiers that will automatically be converted into satellite devices. For instance, to specify that FPC IDs 103, 104, and 105 should be automatically converted into satellite devices, enter a range of 103-105. |
| all | Specifies that all FPC slot identifiers in the Junos Fusion will automatically be converted into satellite devices. |
Required Privilege Level
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 14.2R3.