Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show interfaces satellite-device

Syntax

Description

Display the satellite device extended ports in a Junos Fusion.

Options

device-alias device-alias

Display extended port information for the satellite device using the specified device alias only.

all

Display information for all extended ports and aggregated Ethernet interfaces with extended ports as members configured on all of the satellite devices.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show interfaces satellite-device command. Output fields are listed in the approximate order in which they appear.

Table 1: show interfaces satellite-device Output Fields

Field Name

Field Description

Level of Output

Physical Interface  

Physical interface

Name of the physical interface.

All levels

Interface index

Index number of the physical interface, which reflects its initialization sequence.

detail extensive none

Link-level type

Encapsulation being used on the physical interface.

All levels

Device flags

Information about the physical device.

All levels

Flow control

Flow control status: Enabled or Disabled.

Note:

This field is only displayed if asymmetric flow control is not configured.

All levels

Pad to minimum frame size

Pad Tx VLAN-tagged frame to minimum of 68 bytes.

All levels

Minimum links needed

Minimum number of aggregated links.

All levels

Minimum bandwidth needed

Minimum bandwidth configured for aggregated bundle.

All levels

Device flags

Information about the physical device.

All levels

Interface flags

Information about the interface.

All levels

Current address

Configured MAC address.

detail extensive none

Last flapped

Date, time, and how long ago the interface went from down to up. The format is Last flapped: year-month-day hour: :minute:second:timezone (hour:minute:second ago). For example, Last flapped: 2008–01–16 10:52:40 UTC (3d 22:58 ago).

detail extensive none

Input rate

Input rate in bits per second (bps) and packets per second (pps). The value in this field also includes the Layer 2 overhead bytes for ingress traffic on Ethernet interfaces if you enable accounting of Layer 2 overhead at the PIC level or the logical interface level.

All levels

Output rate

Output rate in bps and pps. The value in this field also includes the Layer 2 overhead bytes for egress traffic on Ethernet interfaces if you enable accounting of Layer 2 overhead at the PIC level or the logical interface level.

All levels

Extended port information

Satellite device port ID

All levels

Active alarms and Active defects

Ethernet-specific defects that can prevent the interface from passing packets. When a defect persists for a certain amount of time, it is promoted to an alarm. Based on the switch configuration, an alarm can ring the red or yellow alarm bell on the switch, or turn on the red or yellow alarm LED on the craft interface. These fields can contain the value None or Link.

  • None—There are no active defects or alarms.

  • Link—Interface has lost its link state, which usually means that the cable is unplugged, the far-end system has been turned off, or the PIC is malfunctioning.

detail extensive none

Interface transmit statistics

All levels

All levels

Logical Interface  

Logical interface

Name of the logical interface.

All levels

Index

Index number of the logical interface, which reflects its initialization sequence.

detail extensive none

SNMP ifIndex

SNMP interface index number for the logical interface.

detail extensive none

Generation

Unique number for use by Juniper Networks technical support only.

detail extensive

Flags

Information about the logical interface.

All levels

Statistics

  • Packets

  • pps

  • Bytes

  • bps

All levels

Bundle

Provides information for each active bundle link.

  • Input

    • Packets

    • pps

    • Bytes

    • bps

    • Output

      • Packets

      • pps

      • Bytes

      • bps

All levels

Adaptive Statistics

  • Adaptive Adjusts

  • Adaptive Scans

  • Adaptive Updates

All levels

Protocol

Protocol family configured on the logical interface.

All levels

Sample Output

Sample Output

show interfaces satellite-device all

Release Information

Command introduced in Junos OS Release 14.2R3.