Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

network-services

Syntax

Hierarchy Level

Description

Set the router’s network services to a specific mode of operation. On MX240, MX480, and MX960 routers, MPC5E and MPC7E power on only if the network services mode configured is enhanced-ip or enhanced-ethernet.

MX2010 and MX2020 support only enhanced-ip and enhanced-ethernet network services modes.

Default

  • MX80, MX104, MX2010, MX2020—enhanced-ip

  • MX240, MX480, MX960—ip

Options

ethernet—Set the router’s network services to Ethernet and use standard, compiled firewall filter format.

enhanced-ethernet—Set the router’s network services to enhanced Ethernet and use enhanced mode capabilities. Only MPCs and MS-DPCs are powered on in the chassis.

ip—Set the router’s network services to Internet Protocol and use standard, compiled firewall filter format.

enhanced-ip—Set the router’s network services to enhanced Internet Protocol and use enhanced mode capabilities. Only MPCs and MS-DPCs are powered on in the chassis. Non-service DPCs do not work with enhanced network services mode options. This feature is enabled by default on MX80, MX104, MX2010, and MX2020 Universal Routing Platforms. For MX960 platform, enhanced-ip configuration must be enabled on both REs together. After committing the configuration, GRES configuration must be disabled and both REs must be rebooted to ensure that all the FPCs reboot and have the same network-services as REs. Any mismatch in network services between RE0, RE1, FPCs will lead to unexpected results.

lan—Set the router’s network services to LAN and use standard, compiled firewall filter format. Reboot the system after setting the router’s network services to LAN.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Release Information

Statement introduced before Junos OS Release 8.5.

enhanced-ethernet and enhanced-ip options introduced in Junos OS Release 11.4.

limited-ifl-scaling option introduced in Junos OS Release 15.1R3 for MX Series routers.