Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Configure AGF Services

This example describes how to configure the Access Gateway Function (AGF) services to support residential gateways that connect to the 5G core (5GC).


CLI Quick Configuration

To quickly configure this example:

  1. Copy the following commands and paste them into a text file.

  2. Remove any line breaks and change any details necessary to match your network configuration

  3. Copy and paste the commands into the CLI at the [edit] hierarchy level

Step-by-Step Procedure

  1. Configure the AGF node.

  2. Configure the supported public land mobile network (PLMN) and tracking area.

  3. Configure the connection to the Access Management and Mobility Function (AMF). The AMF IP address must be reachable in the configured AMF routing instance. Configure the Stream Control Transmission Protocol (SCTP) local endpoint on the AGF. If you are configuring a multihoming association, specify one local endpoint as a primary endpoint.

  4. Configure the user plane information. If you are configuring an user plane function (UPF) on the MX router, you must specify that the UPF is colocated and configure the colocated-user-plane information.

  5. Configure the routing instance to the AMF.