show security flow gate destination-prefix

Syntax

Description

Display information about temporary openings known as pinholes or gates in the security firewall for the specified destination prefix.

Note:

Destination prefix must match both the starting and ending address in the gate.

Options

destination-IP-prefix—Destination IP prefix or address for which to display gate information.
brief | summary—Display the specified level of output.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show security flow gate destination-prefix command. Output fields are listed in the approximate order in which they appear.

Table 1: show security flow gate destination-prefix Output Fields
Field Name	Field Description
Hole	Range of flows permitted by the pinhole.
Translated	Tuples used to create the session if it matches the pinhole. Source address and port Destination address and port
Protocol	Application protocol, such as UDP or TCP.
Application	Name of the application.
Age	Idle timeout for the pinhole.
Flags	Internal debug flags for the pinhole.
Zone	Incoming zone.
Reference count	Number of resource manager references to the pinhole.
Resource	Resource manager information about the pinhole.
Valid gates	Number of valid gates.
Pending gates	Number of pending gates.
Invalidated gates	Number of invalid gates.
Gates in other states	Number of gates in other states.
Total gates	Number of gates in total.

Sample Output

show security flow gate destination-prefix brief
show security flow gate destination-prefix summary

show security flow gate destination-prefix brief

show security flow gate destination-prefix summary

Release Information

Command introduced in Junos OS Release 10.2.

ON THIS PAGE