show chassis fpc errors

Syntax

Display chassis error information including FPC number, severity of error, number of error occurred, cleared, threshold, and corresponding action.

Error Severity Level	Default Threshold	Default Action
Fatal	1	Get the current state and reset the FPC.
Major	1	Get the current state of the FPC and raise an alarm.
Minor	10	Write a log for the event.

view

Table 1 lists the output fields for the show chassis fpc errors command. Output fields are listed in the approximate order in which they appear.

Table 1: show chassis fpc errors Output Fields
Field Name	Field Description
`FPC`	The FPC number.
`Level`	The severity of the error. It can be configured as follows: `fatal`—Fatal error on the FPC. `major`—Major error on the FPC. `minor`—Minor error on the FPC.
`Occurred`	Number of error instances that have occurred.
`Cleared`	Number of error instances that have been cleared.
`Threshold`	Configured threshold value. The associated detection and recovery actions are triggered when this threshold value is exceeded.
`Action`	The detection and recovery actions that are triggered when the threshold value is exceeded. Restart the FPC. Get the current state of the FPC and raise an alarm. Write a log for the event.

Command introduced in Junos OS Release 15.1X49-D40.