clear security flow session application-traffic-control
Syntax
clear security flow session application-traffic-control [Enter] | application-traffic-control-session-options
Description
Clear all application traffic control sessions or the session associated with the specified option.
Application traffic control enables application-aware quality of service, as specified in the rules of the rules set defined for it.
Options
| application | Name of the application or application set.
To display the supported applications list on an SRX Series device, enter the following command from configuration mode: user@host# show groups junos-default applications |
| conn-tag | A 32-bit connection tag that uniquely identifies the GPRS tunneling protocol, user plane (GTP-U), and the Stream Control Transmission Protocol (STCP) sessions. The connection tag for GTP-U is the tunnel endpoint identifier (TEID). For SCTP, it is the vTag. The connection ID remains 0 if the connection tag is not used by the sessions.
|
| destination-port | Destination port.
|
| destination-prefix | Destination IP prefix or address. |
| family | Protocol family:
|
| interface | Name of incoming or outgoing interface. |
| protocol | IP protocol number. |
| source-port | Source port.
|
| source-prefix | Source IP prefix or address. |
Required Privilege Level
clear
Output Fields
When you enter this command, you are provided feedback on the status of your request.
The same output is displayed when you enter an option for this command.
Sample Output
command-name
user@host> clear security flow session application-traffic-control number active sessions cleared
Release Information
Command introduced in Junos OS Release 11.4.